Help identifying 3.5mm jack for CGS33EUR PCB

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: luketeaford, Joe., lisa, Kent

Post Reply
Bhang
Common Wiggler
Posts: 78
Joined: Tue Jan 21, 2014 2:26 am

Help identifying 3.5mm jack for CGS33EUR PCB

Post by Bhang » Fri Sep 13, 2019 5:02 pm

I found an old Ken Stone CGS33 Eurorack Matrix Mixer I bought a while back and forgot about. I'm building it and finding it difficult to figure out what 3.5mm jacks he's using. The parts list from the original documentation states : Jacks as required ( CL 1366?). Question mark seems to indicate he was also unsure. However, I searched for some time but found nothing on a CL 1366 jack. it says the same thing for both PCB-A & PCB-B although the holes for each PCB are different.

Image
Image

The PCB's do not have revision numbers so I am assuming its a first run. All it says is CGS33EUR_A & CGS33EUR_B.

Any ideas?
:help:

User avatar
synthetek
Wiggling with Experience
Posts: 477
Joined: Fri Jun 05, 2015 3:32 am
Location: Orange County, California
Contact:

Post by synthetek » Fri Sep 13, 2019 7:44 pm

Its a cliff jack

Bhang
Common Wiggler
Posts: 78
Joined: Tue Jan 21, 2014 2:26 am

Post by Bhang » Sat Sep 14, 2019 1:29 pm

Thanks!

Post Reply

Return to “Music Tech DIY”