Just a Metasonix RK7 Tube VCO module

A place to discuss the brutal yellow evil we all love so much.

Moderators: Kent, metasonix

User avatar
ritchiedrums
Super Deluxe Wiggler
Posts: 1436
Joined: Fri Feb 19, 2010 7:58 pm
Location: new jersey

Just a Metasonix RK7 Tube VCO module

Post by ritchiedrums » Sun Sep 15, 2019 12:06 pm

[video][/video]

User avatar
Cybananna
Funniest Guy
Posts: 2828
Joined: Mon May 05, 2008 10:23 pm
Location: Ohio, USA
Contact:

Post by Cybananna » Sun Sep 15, 2019 12:33 pm

Sounds great!

User avatar
Yes Powder
Powder that makes you say "Yes"
Posts: 1391
Joined: Thu Sep 03, 2015 2:23 am
Location: Albany, New York
Contact:

Post by Yes Powder » Sun Sep 15, 2019 3:06 pm

:mygod:
Damn, you and Delepathy are blessed people!
So what kinds of tubes does this rock? Is that a 5696 for a thyratron?
Also noticed it sounds less noisy than the R55, especially at lower frequencies— speaking of which, this sounds like it can go much lower than the R55! What kind of range does it get via CV?
Starting to get pretty excited for this.
Last edited by Yes Powder on Sun Sep 15, 2019 5:29 pm, edited 1 time in total.

User avatar
EPTC
Super Deluxe Wiggler
Posts: 1270
Joined: Thu May 14, 2015 9:01 am
Location: Austin TX
Contact:

Post by EPTC » Sun Sep 15, 2019 4:55 pm

Delighted to see it even includes the VCA input in RK size. Nice work, Eric! Envious, Ritchie.
Last edited by EPTC on Wed Sep 18, 2019 11:27 am, edited 1 time in total.
SPOKEN WORD WITH ELECTRONICS, New Releases on EPTC, Spring/Summer 2020:
"This is the TRUTH!": https://eptc.bandcamp.com/album/this-is-the-truth
"A Portable Paul Krassner": https://eptc.bandcamp.com/album/paul-krassner

This week's show is a tribute to David Wojnarowicz:


User avatar
metasonix
Tube Pioneer
Posts: 4382
Joined: Fri Aug 03, 2007 2:35 pm

Post by metasonix » Mon Sep 16, 2019 12:52 pm

Thanks. It uses a 5696 thyratron and a 5702 subminiature pentode, because that's all I could fit into an 8hp panel. It uses about 200 ma from +12 and a few ma from -12, no +5.

Guess I should get panels made, eh?

User avatar
Delepathy
Common Wiggler
Posts: 82
Joined: Tue Jun 07, 2016 11:35 pm
Location: WA
Contact:

Post by Delepathy » Mon Sep 16, 2019 5:49 pm

Due to the amount of "cold inrush" current coming in from the Sodomizer panel, I had to find a PSU sufficient enough to even power it. Which, in the Serge world, doesn't seem to go above 1.7A (which'll power up to ~5 17" panels) for commercial PSUs. 1.7A would've been just enough to ONLY power the Sodomizer lol. Thankfully, Logan Erickson (MA) builds his own "Ammo Box" PSUs, which carry a hefty 3.4A. I asked if he could possibly build a custom supply for me, that reaches at least 4A, but he didn't have the time. So I bought an Ammo Box. With that, it should be here within the next two weeks, along with a CGS74 distro board. By then I'll be posting some demos of my own. I'll forever be jealous of ritchiedrums though (;

Image

User avatar
metasonix
Tube Pioneer
Posts: 4382
Joined: Fri Aug 03, 2007 2:35 pm

Post by metasonix » Wed Sep 18, 2019 2:42 am

Delepathy wrote:Due to the amount of "cold inrush" current coming in from the Sodomizer panel, I had to find a PSU sufficient enough to even power it. Which, in the Serge world, doesn't seem to go above 1.7A (which'll power up to ~5 17" panels) for commercial PSUs. 1.7A would've been just enough to ONLY power the Sodomizer lol. Thankfully, Logan Erickson (MA) builds his own "Ammo Box" PSUs, which carry a hefty 3.4A. I asked if he could possibly build a custom supply for me, that reaches at least 4A, but he didn't have the time. So I bought an Ammo Box. With that, it should be here within the next two weeks, along with a CGS74 distro board.
I would have expected a 1.7A supply to run that load, but then I have NO idea what kind of power supplies STS had used or is using. No one seems able to tell me. I suspect it's a low cost computer brick. That's what Random Source is using in the PS-M and the powered boat. Dunno.

There's nothing on EGRES about power supplies. It's also badly outdated and full of broken links.

In my world 3.4 amps isn't very hefty, but then there are absurd numbers of tubes in my Euro systems. If you wish I could build a better supply for your Serge panels. Just pay for the parts. It would be far cheaper than anything STS or RS is offering.

For chrissakes....this thing costs $32 and puts out 16.8 amps.
https://www.mouser.com/ProductDetail/ME ... h6Rg%3D%3D

User avatar
dubonaire
Super Deluxe Wiggler
Posts: 6511
Joined: Sun Jan 17, 2010 10:45 pm

Post by dubonaire » Wed Sep 18, 2019 3:20 am

These panels look different to the ones on your website. Is this how they will look? I've been gear-lusted into contemplating a row of Metasonix. I shoud add for the sound. I love the sound.

User avatar
Yes Powder
Powder that makes you say "Yes"
Posts: 1391
Joined: Thu Sep 03, 2015 2:23 am
Location: Albany, New York
Contact:

Post by Yes Powder » Wed Sep 18, 2019 9:03 am

dubonaire wrote:These panels look different to the ones on your website. Is this how they will look?
Ritchie's panel is a prototype model, and Delepathy's is a custom 4U Serge panel.

User avatar
ritchiedrums
Super Deluxe Wiggler
Posts: 1436
Joined: Fri Feb 19, 2010 7:58 pm
Location: new jersey

Post by ritchiedrums » Mon Sep 23, 2019 3:19 pm

dubonaire wrote:These panels look different to the ones on your website. Is this how they will look? I've been gear-lusted into contemplating a row of Metasonix. I shoud add for the sound. I love the sound.
I HIGHLY RECOMMEND A ROW OF METASONIX!
YOU WONT REGRET IT

User avatar
gringostar
Wiggling with Experience
Posts: 316
Joined: Sun May 21, 2017 7:59 pm
Location: The Nameless City

Post by gringostar » Tue Sep 24, 2019 10:55 am

ritchiedrums wrote:
dubonaire wrote:These panels look different to the ones on your website. Is this how they will look? I've been gear-lusted into contemplating a row of Metasonix. I shoud add for the sound. I love the sound.
I HIGHLY RECOMMEND A ROW OF METASONIX!
YOU WONT REGRET IT
Your power supply on the other hand will try to murder you in your sleep.

User avatar
Yes Powder
Powder that makes you say "Yes"
Posts: 1391
Joined: Thu Sep 03, 2015 2:23 am
Location: Albany, New York
Contact:

Post by Yes Powder » Tue Sep 24, 2019 11:13 am

ritchiedrums wrote:I HIGHLY RECOMMEND A ROW OF METASONIX!
YOU WONT REGRET IT
THIS! Do it!
In a world full of cloned vintage circuits and increasingly convincing softsynths, Metasonix is a sound that you still can't get anywhere else.

User avatar
dubonaire
Super Deluxe Wiggler
Posts: 6511
Joined: Sun Jan 17, 2010 10:45 pm

Post by dubonaire » Tue Sep 24, 2019 2:22 pm

Yes Powder wrote:
ritchiedrums wrote:I HIGHLY RECOMMEND A ROW OF METASONIX!
YOU WONT REGRET IT
THIS! Do it!
In a world full of cloned vintage circuits and increasingly convincing softsynths, Metasonix is a sound that you still can't get anywhere else.
Ha! OK thinking about it.

@gringostar I have plenty of power available.

User avatar
Delepathy
Common Wiggler
Posts: 82
Joined: Tue Jun 07, 2016 11:35 pm
Location: WA
Contact:

Post by Delepathy » Tue Sep 24, 2019 9:08 pm

Logan sent me a photo of the distro. board and Molex-to-XLR cable yesterday (below). Surprised me with the cable being entirely yellow. A nod to Metasonix, of course.

Image

User avatar
FatRocky
Super Deluxe Wiggler
Posts: 2657
Joined: Sun Oct 16, 2011 12:56 pm

Post by FatRocky » Thu Sep 26, 2019 2:35 pm

RKP rules! just add a black banana jack to avoid ground loops with your serge

User avatar
Delepathy
Common Wiggler
Posts: 82
Joined: Tue Jun 07, 2016 11:35 pm
Location: WA
Contact:

Post by Delepathy » Thu Sep 26, 2019 6:27 pm

FatRocky wrote:RKP rules! just add a black banana jack to avoid ground loops with your serge
I have other plans in mind. I appreciate your suggestion though!

Blake Smith
Common Wiggler
Posts: 93
Joined: Fri Apr 12, 2013 4:49 pm
Location: Vancouver

Post by Blake Smith » Tue Oct 01, 2019 8:15 pm

I was a little sad about not being able to get a s2000, but a couple of thyratron VCOs and an RK2 instead would be lovely.

User avatar
lisa
Super Deluxe Wiggler
Posts: 4596
Joined: Fri Jun 02, 2017 7:00 am
Location: Sweden
Contact:

Post by lisa » Wed Oct 16, 2019 3:38 pm

metasonix wrote:Guess I should get panels made, eh?
Yes! :metasonix:
My first modular track where I used drum modules! BIA, Entity Percussion, Chimera, Elements. There's also a ton of FM cross modulation from the Instruō Cš-L in there and the Metasonix R56 is a big part of the sound. :star:



We also just did a live performance. Just eurorack, a mixer and two nitwits. :hyper: http://tiny.cc/8ndspz

User avatar
Yes Powder
Powder that makes you say "Yes"
Posts: 1391
Joined: Thu Sep 03, 2015 2:23 am
Location: Albany, New York
Contact:

Post by Yes Powder » Thu Oct 17, 2019 7:16 am

lisa wrote:
metasonix wrote:Guess I should get panels made, eh?
Yes! :metasonix:
Image

User avatar
albiedamned
Super Deluxe Wiggler
Posts: 1167
Joined: Mon Mar 12, 2012 11:12 am
Location: Ellicott City, Maryland

Re: Just a Metasonix RK7 Tube VCO module

Post by albiedamned » Mon Jan 13, 2020 12:27 pm

Eric, any update on when the RK7 will be out? Is is what's next, or is your new standalone synth next?
Stuff I did by myself: https://soundcloud.com/albiedamned21133
Stuff I did with my pretend band: https://soundcloud.com/borisandnatasha

User avatar
metasonix
Tube Pioneer
Posts: 4382
Joined: Fri Aug 03, 2007 2:35 pm

Re: Just a Metasonix RK7 Tube VCO module

Post by metasonix » Tue Jan 14, 2020 10:17 pm

In a couple weeks--panels are being screenprinted

User avatar
lisa
Super Deluxe Wiggler
Posts: 4596
Joined: Fri Jun 02, 2017 7:00 am
Location: Sweden
Contact:

Re: Just a Metasonix RK7 Tube VCO module

Post by lisa » Fri Jan 24, 2020 6:11 pm

Cool! I’ll have to start looking into Hz/V to V/oct modules then. :goo:
My first modular track where I used drum modules! BIA, Entity Percussion, Chimera, Elements. There's also a ton of FM cross modulation from the Instruō Cš-L in there and the Metasonix R56 is a big part of the sound. :star:



We also just did a live performance. Just eurorack, a mixer and two nitwits. :hyper: http://tiny.cc/8ndspz

electricanada
Super Deluxe Wiggler
Posts: 1144
Joined: Wed Nov 29, 2017 12:26 am
Location: Norfolk, VA

Re: Just a Metasonix RK7 Tube VCO module

Post by electricanada » Fri Jan 24, 2020 8:01 pm

lisa wrote:
Fri Jan 24, 2020 6:11 pm
Cool! I’ll have to start looking into Hz/V to V/oct modules then. :goo:
It’s the only reason I keep the SQ1 around.
Eléctrica (electric) Nāda (the yoga of sound).

User avatar
luchog
Crazy Pony
Posts: 1065
Joined: Sat Nov 21, 2015 2:57 pm
Location: The Emerald City

Re: Just a Metasonix RK7 Tube VCO module

Post by luchog » Sat Jan 25, 2020 2:55 pm

lisa wrote:
Fri Jan 24, 2020 6:11 pm
Cool! I’ll have to start looking into Hz/V to V/oct modules then. :goo:
I'm currently using the Ladik U-202 V/oct to Hz/V converter with my R-55.

User avatar
metasonix
Tube Pioneer
Posts: 4382
Joined: Fri Aug 03, 2007 2:35 pm

Re: Just a Metasonix RK7 Tube VCO module

Post by metasonix » Sat Jan 25, 2020 4:41 pm

luchog wrote:
Sat Jan 25, 2020 2:55 pm
I'm currently using the Ladik U-202 V/oct to Hz/V converter with my R-55.
Would be helpful if you could show how to set the controls, please?

Post Reply

Return to “Metasonix”