HEX-01 eurorack cable hanger

jjmcclear · Post by **jjmcclear** » Fri Nov 30, 2018 3:40 pm

Visit www.eurodesk-z.com to place your order! Use coupon code WIGGLER for 10% off your entire order!

Hey guys,

I recently teamed up with ALM Busy Circuits, on a limited run of my Eurodesk-Z HEX-01 cable hanger. The ALM logo, will hold 1/4 inch cables. Available on their online shop, right now! If you're in Europe... here's your chance to get one, with reduced shipping rates. Since ALM is based in the UK. Grab one quick, because they'll go fast!

ALM Busy Circuits Shop

[video][/video]

ranix · Post by **ranix** » Fri Nov 30, 2018 6:00 pm

I'd love one for 1/4" cables. I use something like this now but it's not tall enough. I just zip tied two Pomona cable holders to a mic stand.

joesdeals · Post by **joesdeals** » Sat Dec 01, 2018 7:47 am

I really like that design, I def would buy it

What about 3D printing it

jjmcclear · Post by **jjmcclear** » Sat Dec 01, 2018 2:19 pm

I just wonder if the material would hold up to the weight etc. I'm waiting to get a price estimate now.

... but if you just can't wait http://shpws.me/QUHS

joesdeals wrote:I really like that design, I def would buy it

What about 3D printing it

jjmcclear · Post by **jjmcclear** » Sat Dec 01, 2018 2:21 pm

I'll consider two sizes.

Thanks!

ranix wrote:I'd love one for 1/4" cables. I use something like this now but it's not tall enough. I just zip tied two Pomona cable holders to a mic stand.

jjmcclear · Post by **jjmcclear** » Sat Dec 01, 2018 3:36 pm

Here's a link to 3D print it, for now... http://shpws.me/QUHS

jjmcclear · Post by **jjmcclear** » Mon Dec 31, 2018 11:52 am

The 3D printed prototype turned out really nice!

Blairio · Post by **Blairio** » Mon Dec 31, 2018 10:00 pm

I would buy one of these. All you needs is any old standard lamp stand or mic stand, and hey presto.

Have you a price in mind?

mckenic · Post by **mckenic** » Mon Dec 31, 2018 10:15 pm

JohnLRice · Post by **JohnLRice** » Mon Dec 31, 2018 11:27 pm

Blairio wrote:I would buy one of these. All you needs is any old standard lamp stand or mic stand, and hey presto.

Have you a price in mind?

Also, 4 or 6 eye-bolts could be attached to the outer holes so that it could be hung from the ceiling? Either attaching to two individual ceiling points for stability or I suppose all going to a single point for simplicity? Maybe using "swag hooks" typically used for hanging plants and light fixtures?

https://www.instructables.com/id/How-to ... e-Ceiling/

JohnLRice · Post by **JohnLRice** » Mon Dec 31, 2018 11:46 pm

Or I suppose a standard ceiling mount microphone flange could be used with a goose neck, since a solid bar might bend, break, or get torn out of the ceiling if bumped into?

jjmcclear · Post by **jjmcclear** » Fri Jan 04, 2019 2:13 pm

Waiting on the Kickstarter page to be reviewed. Once that's ready, people can begin placing pre orders.

Jesse

criticalmonkey · Post by **criticalmonkey** » Fri Jan 04, 2019 6:25 pm

3d print page not working

jjmcclear · Post by **jjmcclear** » Fri Jan 04, 2019 6:31 pm

criticalmonkey wrote:3d print page not working

Yeah, I took I down. The resins too fragile, and it’s too expensive.

umma gumma · Post by **umma gumma** » Fri Jan 04, 2019 7:21 pm

this is a great design!

I'd be interested in one for 1/4" cables

infradead · Post by **infradead** » Sat Jan 05, 2019 3:59 pm

kickstarter link yet boss?

these would be boss for live shows

magneteyez · Post by **magneteyez** » Sun Jan 06, 2019 12:36 pm

Count me in for 1 OR 2 too. Cable management is a nightmare over here.

Todai · Post by **Todai** » Sun Jan 06, 2019 12:50 pm

Great design!

I'd consider a request (from the manufacturer) for both steel and aluminium?

Corrupt · Post by **Corrupt** » Mon Jan 07, 2019 3:02 am

Would take one for pomonas (same cable thickness as tiptop stackcables so surely fine?) and one for 1/4 inch cables too! Looking forward to the Kickstarter.

soon_come · Post by **soon_come** » Mon Jan 07, 2019 6:13 pm

I'm into this.

pandino · Post by **pandino** » Tue Jan 08, 2019 12:11 pm

I dig it

chiavere · Post by **chiavere** » Tue Jan 08, 2019 2:30 pm

Hi - looks great! Wondering if it can also safely hold euro cables with smaller/narrower barrels like the control cables? Thanks!

jjmcclear · Post by **jjmcclear** » Thu Jan 17, 2019 11:12 pm

Still working out the details for the kickstarter page. Was hoping to have it up by the end of this week, but... it's looking like it might go into the next. So I'm shooting for the 25th of this month (Feb).

I was able to fit 360 tip top stackable cables on the prototype. Pretty awesome.

Working on additional stuff for the kickstarter rewards... t-shirts, and sticker designs.

magneteyez · Post by **magneteyez** » Fri Jan 18, 2019 3:39 pm

Nice. Keep up the good work.

chiavere · Post by **chiavere** » Fri Jan 18, 2019 3:50 pm

Hi -

Are the grooves narrow enough to support smaller-barreled cables like those made by control, black market, etc.?

Thanks!

MUFF WIGGLER

MUFF WIGGLER

HEX-01 eurorack cable hanger

HEX-01 eurorack cable hanger

3D Print

prototype

Kickstarter