Banana system pictures

Discussing some incredible modules that don't quite fit into the other forum categories.

Moderators: luketeaford, lisa, Kent, Joe.

Post Reply
maxime.annah
Common Wiggler
Posts: 57
Joined: Sun Jun 24, 2012 4:19 pm

Post by maxime.annah » Thu Dec 11, 2014 10:43 am

MechaSeb wrote:Image
What's the "card" which is plug into the mixer? (or on the module next to the mixer)

User avatar
MechaSeb
Super Deluxe Wiggler
Posts: 1503
Joined: Fri Apr 02, 2010 7:21 pm
Location: France

Post by MechaSeb » Thu Dec 11, 2014 12:02 pm

maxime.annah wrote:What's the "card" which is plug into the mixer? (or on the module next to the mixer)
It allows you to switch On/Off internal spring reverb routing plus output individually each of the four channels of the following : reverb, Program, Monitor, Tape 1&2, Aux1&2. Still, as easy as it may looks to, combined w/ 227 In/out this card is a routing jewerly. I am still only scrashing the surface of the routing possibility.
Last edited by MechaSeb on Thu Dec 11, 2014 12:15 pm, edited 1 time in total.

User avatar
phisynth
banana nabab
Posts: 1793
Joined: Wed Sep 07, 2011 5:06 pm
Location: right above my feet

Post by phisynth » Thu Dec 11, 2014 12:08 pm

it's a beauty, Seb :tu:

User avatar
tIB
Stainer!
Posts: 9323
Joined: Mon Jun 08, 2009 5:28 am
Location: UK

Post by tIB » Thu Dec 11, 2014 12:50 pm

Hurrah for dads! The old man brought over the side panels he made up for me...

ImageUntitled by sonofprent, on Flickr

ImageUntitled by sonofprent, on Flickr

Thank you dad! :guinness:

User avatar
djangosfire
dimensionally transcendental
Posts: 3299
Joined: Sun Sep 06, 2009 11:13 pm

Post by djangosfire » Thu Dec 11, 2014 12:54 pm

tIB wrote:Hurrah for dads! The old man brought over the side panels he made up for me...

ImageUntitled by sonofprent, on Flickr

ImageUntitled by sonofprent, on Flickr

Thank you dad! :guinness:
KICK ASS !!! Looks like an awesome well rounded system @tIB !! :cloud:
Thank you - Hope your day is awesome!

User avatar
tIB
Stainer!
Posts: 9323
Joined: Mon Jun 08, 2009 5:28 am
Location: UK

Post by tIB » Thu Dec 11, 2014 1:45 pm

I hope so- still have a couple of things to figure out: whether I need my CVP/CP3 mixer, the results of which will decide whether or not I either get a 227e over the 207e, add a 210e or maybe something else. Also working on how I'll raise the cash for the 223e that fits in the little gap in the bottom right!

User avatar
aethyr
Wiggling with Experience
Posts: 371
Joined: Fri May 23, 2014 5:45 pm
Location: Over the edges

Post by aethyr » Sun Dec 14, 2014 4:17 pm

MechaSeb wrote:Image
Awesome rig, Mechaseb and very inspiring :tu:

User avatar
fluxmonkey
Super Deluxe Wiggler
Posts: 1838
Joined: Sat Oct 18, 2008 10:05 pm
Contact:

Post by fluxmonkey » Sun Dec 14, 2014 7:50 pm

my buchla clone is stabilizing a bit, so i decided to give a little love to the serge, rearranged some things and tidied up a few loose ends:

Image

among other things, i pulled out the TKB so it could do double-duty w/ both the serge & buchla. better ergonomics, anyway, playing it as a keyboard in the vertical rack was not ideal. surprizingly, did not have to do any mods or level shifting to work w/ buchla, at least my clones... ran as a sequencer ran fine off of buchla pulses, and the pulse out triggered my 281.
www.fluxmonkey.com

BUILDER FOR HIRE - kits or custom, email me with your needs

User avatar
aethyr
Wiggling with Experience
Posts: 371
Joined: Fri May 23, 2014 5:45 pm
Location: Over the edges

Post by aethyr » Sun Dec 14, 2014 8:03 pm

Super cool serge fluxmonkey!

construct09
Sine me up
Posts: 1873
Joined: Sun Mar 27, 2011 9:40 pm
Location: Australia

Post by construct09 » Mon Dec 15, 2014 12:34 am

:nod: sure is

User avatar
MechaSeb
Super Deluxe Wiggler
Posts: 1503
Joined: Fri Apr 02, 2010 7:21 pm
Location: France

Post by MechaSeb » Mon Dec 15, 2014 12:32 pm

@Phisynth & aethyr: Thanks for the kind words. This is appreciate.
Nice system Fluxmonkey ! :tu:

User avatar
woVERTICES
Wiggling with Experience
Posts: 433
Joined: Thu Dec 04, 2014 5:19 pm

Post by woVERTICES » Mon Dec 22, 2014 6:27 am

I'm enjoying the Teenage Engineering OP-1 with the OPLAB midi to cv / cv to midi converter to couple my Buchla modules with the OP-1...fun!
Best,
John
http://wovertices.tumblr.com
Image

User avatar
DomMorley
Super Deluxe Wiggler
Posts: 1163
Joined: Sat Mar 10, 2012 3:27 pm
Location: UK

Post by DomMorley » Mon Dec 22, 2014 6:52 am

3001 wrote:Image
took a while to set it up, but set up now! missing from it are 3 other bugbrand rows(Gotta get a new rack stand), and a serge panel in a day or two. IT was difficult to figure out how to fit it all on one desk!
Just noticed your Brat! THE pedal for synth distortion IMHO (I have two!).
Lovely setup BTW - Modcan and Fenix is an awesome combination.
How I fill my days: www.dommorley.com

"Your head will collapse, but there's nothing in it..."

User avatar
audioCTRL
Wiggling with Experience
Posts: 387
Joined: Wed Jun 09, 2010 2:40 am
Location: cph
Contact:

Post by audioCTRL » Tue Dec 23, 2014 2:48 am

aethyr wrote:
MechaSeb wrote:Image
Awesome rig, Mechaseb and very inspiring :tu:
:hail: That most be the coolest Zero case ever!

jamb
Wiggling with Experience
Posts: 303
Joined: Mon Nov 07, 2011 10:07 am
Location: shy town

Post by jamb » Wed Dec 24, 2014 5:07 pm

Image

User avatar
dan_p
Super Deluxe Wiggler
Posts: 3519
Joined: Tue Jan 19, 2010 5:47 pm
Location: UK 4000' above Worc's

Post by dan_p » Wed Dec 24, 2014 5:58 pm

^ simple and awesome!! nice panel.
Oh you got a Nickel, I got a Dime,
I'd like to get to know you but I haven't got the time,
You got to walk like a mannequin, roll like a tyre,
Act on reaction dodge the big spud fryer
------------------------------------------
www.Soundcloud.com/dan_p
www.YouTube.Com/d4nnyp

jamb
Wiggling with Experience
Posts: 303
Joined: Mon Nov 07, 2011 10:07 am
Location: shy town

Post by jamb » Wed Dec 24, 2014 9:33 pm

Thanks .. Serge is a thing o beauty :tu:

User avatar
woVERTICES
Wiggling with Experience
Posts: 433
Joined: Thu Dec 04, 2014 5:19 pm

Post by woVERTICES » Thu Dec 25, 2014 5:10 am

Ah...the beauty of Serge functionally-dense simplicity!
Best,
John
http://wovertices.tumblr.com

User avatar
aethyr
Wiggling with Experience
Posts: 371
Joined: Fri May 23, 2014 5:45 pm
Location: Over the edges

Post by aethyr » Fri Dec 26, 2014 3:23 pm

Looking good! :party:

User avatar
abendrot
Veteran Wiggler
Posts: 703
Joined: Sun Dec 21, 2008 5:18 am
Location: austria

Post by abendrot » Sat Dec 27, 2014 12:18 pm

It keeps getting bigger. More modules on the way. Buchla 106 Clone
by Djangosfire and finally a module module frame that I can fill over
the next couple of months. This setup is screaming for a mixer
and the modules for a bigger case. Sooooon :lol:

Image

User avatar
woVERTICES
Wiggling with Experience
Posts: 433
Joined: Thu Dec 04, 2014 5:19 pm

Post by woVERTICES » Sat Dec 27, 2014 4:28 pm

VERY nice indeed!!!!
Best,
John
http://wovertices.tumblr.com

User avatar
djangosfire
dimensionally transcendental
Posts: 3299
Joined: Sun Sep 06, 2009 11:13 pm

Post by djangosfire » Sat Dec 27, 2014 9:57 pm

:sb: Awesome Serge @jamb :hyper:
:cloud: Love that Buchla @abendrot !! :party:

Sneak peek at my "almost finished" DIY 10u SFTMC style "Retro 100". Still need to build a 112 in a skiff, and get the 156p paneled up ... Hope to have this setup finished by end of January :)

Then..... I'll build a 101 style 25u next year!

Image
Thank you - Hope your day is awesome!

DrOctave
Super Deluxe Wiggler
Posts: 1880
Joined: Mon Jun 08, 2009 11:54 pm
Location: trapped in some wires

Post by DrOctave » Sat Dec 27, 2014 10:10 pm

nice one adam. so small and basic but in a good way.
It's beter to have cords and not need them than to need them and not have them.
http://www.youtube.com/user/DrOctave1?feature=mhum

User avatar
woVERTICES
Wiggling with Experience
Posts: 433
Joined: Thu Dec 04, 2014 5:19 pm

Post by woVERTICES » Sun Dec 28, 2014 8:12 am

Retro-wonderful!!!...nice system Adam!
Best,
John
http://wovertices.tumblr.cim

User avatar
tragedybysyntax
Banned until Restitution Made
Posts: 2913
Joined: Sat Jun 16, 2007 11:39 am

Post by tragedybysyntax » Thu Jan 01, 2015 11:17 am

Figured I would post the last 2014 update in my all copper suitcase dubbed "Otis" Should be done in the next few months >=)
Image
Image
Image
- [ Custom Metalwork ] -

Post Reply

Return to “Buchla, EMS & Serge”