[Sold Out] - Euro Panels for tabulaRasa - 2nd Run

clarke68 · Post by **clarke68** » Tue Apr 10, 2012 12:50 am

Euro panels for the tabulaRasa Hybrid Wavetable Oscillator are now sold out. Go ahead and leave a post (or send a PM) if you want one, I can do another run once there is enough interest.

Panels are 10HP and run $30USD each, including mounting hardware.
The SD card slot needs to be custom milled, so the price is a little higher than other panels this size.

Shipping Info
Shipping rates are per order, for any number of panels (up to a point...very large orders may require a larger box/more $$$, I'll let you know):

U.S. - $5.35
Canada/Mexico - $12.95
All other countries - $16.95

These rates are for USPS Priority, which does not include tracking on international shipments. I've had a few cases where international customers have had delays receiving their panels, and the lack of tracking has been frustrating. If you would like registered mail, tracking, or insurance let me know when you place your order and I'll get back to you with a price.

Order Info
To order, send the following to me either by PM or email at clarke at muffwiggler dot com:

I'm ordering [x] pieces of the tabulaRasa panel for $xx, plus shipping, for a total of $xx.

I'm aware that I may have to pay additional amounts of customs and tax in my country.

I'm also aware that I'm only buying screened and drilled panel that may help me building an electronic module - I'm *not* buying a diy kit, not a "project" - just a screened/drilled panel. I know how to build electronic circuits and I am trained in electrical safety matters. The seller of these panels will not be held responsible for any damage that results from these panels, directly or indirectly.

My shipping address is

xxxxxx
xxxxx
xxxx
xxx

My PayPal address is xxxx@xxxx.com
My Forumname is xxxxxx

Also let me know if you'd like to add any other panels to your order, or if you want to combine shipping with an order you've already placed.

When I get your order, I will reply with a Paypal invoice, due May 4, 2012. I'll shoot to have the panel order placed on April 20, 2012 (this will have panels shipping out to you mid- to late May), but the date can move either direction if it makes sense.

This is going to be a really great module, props to Greg Surges for making it available to us!

clarke68 · Post by **clarke68** » Tue Apr 10, 2012 12:50 am

Order List

akrylik - 1 tabulaRasa
bleeps - 1 tabulaRasa
bonusplays - 2 tabulaRasa
bsmith - 1 tabulaRasa
cathartech - 1 tabulaRasa
chocolatyshatner - 1 tabulaRasa
gwaidan - 1 tabulaRasa
hpsounds - 1 tabulaRasa
keninverse - 1 tabulaRasa
limpmeat - 2 tabulaRasa
mckenic - 1 tabulaRasa
monobass - 1 tabulaRasa
mono-poly - 3 tabulaRasa
nangu - 5 tabulaRasa
negativspace - 1 tabulaRasa
NV - 1 tabulaRasa
Orbless - 1 tabulaRasa
Rod Serling Fan Club - 2 tabulaRasa
runblip - 1 tabulaRasa
Spandex - 1 tabulaRasa
synaptech - 1 tabulaRasa

I have received payment from the people in blue.
I have shipped to the people in green.

Orbless · Post by **Orbless** » Tue Apr 10, 2012 12:56 am

hpsounds · Post by **hpsounds** » Tue Apr 10, 2012 1:12 pm

Hi Clarke,

I need 1 panel for the tabulaRasa PCB. I may need a panel for the J3RK Crossfader.

HÃƒÂ©di K.

chocolatyshatner · Post by **chocolatyshatner** » Tue Apr 10, 2012 4:50 pm

Ordered 1

clarke68 · Post by **clarke68** » Sat Apr 14, 2012 6:26 pm

Update: we're doing great on orders for these...I'll be sending these off to the manufacturer on Friday (hopefully along with the others in my sig), so everything will ship out to you in mid-late May. Orders are still open, but we have enough now to make the run!

clarke68 · Post by **clarke68** » Tue Apr 24, 2012 12:32 am

Update: Order has been placed with the manufacturer! I'm still taking orders, and payment isn't due until May 4, but huge thanks to those who have already paid (helps me sleep at night)!

synaptech · Post by **synaptech** » Tue Apr 24, 2012 12:40 pm

Doh, just got back home from the UK - payment sent!

negativspace · Post by **negativspace** » Mon May 07, 2012 8:42 am

I just got a PCB from Greg, guess I need one of these! (Knowing MPC I assume you haven't signed off on the art proof yet & still have an opportunity to up the #s.)

clarke68 · Post by **clarke68** » Mon May 07, 2012 11:55 am

negativspace wrote:I just got a PCB from Greg, guess I need one of these! (Knowing MPC I assume you haven't signed off on the art proof yet & still have an opportunity to up the #s.)

Since this was a reorder there was no art proof...in fact they're already on their way! But I've got extras, so no problem getting you in.

gwaidan · Post by **gwaidan** » Wed May 16, 2012 12:41 am

Can I get in on this one too for one more TR euro panel please? I already have a 291 ordered...

clarke68 · Post by **clarke68** » Wed May 16, 2012 2:36 am

gwaidan wrote:Can I get in on this one too

You definitely can...just sent you an invoice.

The tabulaRasa panels are in...I sent a few out today (see the 2nd post for shipping status) although most of you have opted to have all your panels ship together, so yours will go out once the other panels arrive in another week or two.

gwaidan · Post by **gwaidan** » Wed May 16, 2012 5:48 am

Cool! Paid!!!

hpsounds · Post by **hpsounds** » Thu May 17, 2012 1:04 am

What type of potentiometers should we use for the Blend CV and Wave CV ? 100k linear ?

HÃƒÂ©di K.

clarke68 · Post by **clarke68** » Thu May 17, 2012 11:31 am

hpsounds wrote:What type of potentiometers should we use for the Blend CV and Wave CV ? 100k linear ?

I used 100k linear for mine, and they work fine. Someone made a fine-sounding case in the other thread for using 10k...probably anything you have around will work.

clarke68 · Post by **clarke68** » Thu May 17, 2012 11:37 am

Here's some build pics from the old thread. Your panels come with mounting hardware that should be installed like this:

The PCB has no dedicated ground point. so here's one option (white wire):

Here's another option (red wire on the resistor lead near the PWM Out), and a great idea for installing a Euro power connector to this PCB:

hpsounds · Post by **hpsounds** » Thu May 17, 2012 1:31 pm

Clarke,

Thanks for your advices for the knobs. That's what I've planed to do.

How did you mount this euro connector ? Did you remove first the un-useful pins ?

HÃƒÂ©di K.

clarke68 · Post by **clarke68** » Thu May 17, 2012 2:05 pm

hpsounds wrote:How did you mount this euro connector ? Did you remove first the un-useful pins ?

That's actually gwaidan's photo, he explained it like this:

use pliers to pull out the 2nd and 4th pair of connectors from a ten-pin header, bend the row of pins away from the notch underneath the header so they go flattish and are in contact with the pins from the other row which remained straight, then insert the header so the straight pins go into the padholes and the flattened pins are in contact with the same pad surface as their counterparts on the notched side. Apply solder liberally from the bottom of the board, and although the resulting header will be at a bit of an angle it'll be secure.

I just soldered a ribbon cable directly to PCB (not fancy, but it works), but I'm going to use the modded Euro connector for my next one.

limpmeat · Post by **limpmeat** » Thu May 17, 2012 7:44 pm

Awesome, was wondering how to do the euro connector neatly.

Spandex · Post by **Spandex** » Fri Jun 22, 2012 8:00 am

Anyone got another source for the SD card socket? Sparkfun are out..
http://www.sparkfun.com/products/136

A Mouser partnumber would be ideal if anyone knows it...

e.g. is this ok?
http://uk.mouser.com/ProductDetail/Mole ... cuvg%3d%3d

It's SMD/SMT...

mOBiTh · Post by **mOBiTh** » Sun Jun 24, 2012 8:54 am

edit: ignore

SamUK · Post by **SamUK** » Tue Jul 10, 2012 2:07 pm

Are you still taking orders?

mikecameron · Post by **mikecameron** » Tue Jul 10, 2012 2:12 pm

I PM'd Clarke about it earlier today and got this response:

"I still have a bunch of extras from the last batch, just haven't bothered to update any threads since Greg started this most recent PCB run."

clarke68 · Post by **clarke68** » Tue Jul 10, 2012 3:45 pm

SamUK wrote:Are you still taking orders?

Mike is right! I still have a bunch. If you want one (or more than one!) just follow the order procedure outlined in the first post.

mckenic · Post by **mckenic** » Thu Aug 09, 2012 5:02 pm

Thank you, thank you, thank you Clarke!

w00t!

MUFF WIGGLER

MUFF WIGGLER

[Sold Out] - Euro Panels for tabulaRasa - 2nd Run

[Sold Out] - Euro Panels for tabulaRasa - 2nd Run