ORDER THREAD: 266-style PCBs

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Kent, luketeaford, Joe.

Post Reply

What optos should i use in the layout?

keep them original (vactrols $10-25 each)
50
75%
adapt them to silonex ($2-3 each)
17
25%
 
Total votes: 67

User avatar
Votek_Mendo
Super Deluxe Wiggler
Posts: 1449
Joined: Wed Jan 19, 2011 9:22 pm
Location: Montreal

Post by Votek_Mendo » Wed Aug 01, 2012 11:16 pm

Received my Buchla 266 pcb today.
Montreal. :)

Thx again Roman.
Sent pm for 207 x2
WTB: Publison KB2000 & DHM 89 B2, Vestax Faderboard, Electrospace TIME matrix, Syntovox 221


https://twitter.com/Votek_Mendo
http://soundcloud.com/votek_mendo
http://statigr.am/votek_mendo

User avatar
gwaidan
Super Deluxe Wiggler
Posts: 1939
Joined: Sat Mar 07, 2009 7:26 pm
Location: Sinney, Orstraya
Contact:

Post by gwaidan » Wed Aug 01, 2012 11:28 pm

Got the 266c PCBs today-look great!

PM sent re 207

moogah
Wiggling with Experience
Posts: 443
Joined: Mon Nov 22, 2010 10:27 am

Post by moogah » Thu Aug 02, 2012 9:59 am

Got my 5U 266 PCB set today, thanks roman :) :tu:

PM sent on the 207. Buchla format isn't what I use, but I'm really really in need of preamp and mixer circuits.

User avatar
zeta
Common Wiggler
Posts: 234
Joined: Tue Jul 19, 2011 9:20 am
Location: Eternal weekend

Post by zeta » Fri Aug 03, 2012 4:09 am

pcbs arrived today. thanks a lot!!!

User avatar
mattrick
Common Wiggler
Posts: 188
Joined: Wed Apr 18, 2012 10:16 pm
Location: Madrid, New Mexico, USA

Post by mattrick » Sat Aug 04, 2012 2:47 am

roman_f wrote: it seems that i've sent all orders and have 2 Buchla and 5 EURO sets left, all 5Us are gone. i do not sell them until i'm 100% sure that all orders are shipped, but you can make a reserve.
emailed to reserve one of those last buchla kits in the event that they become available
san pedro labs | creative audio electronics | custom synth manufacture
my work: http://sanpedrolabs.com
my music: http://www.soundcloud.com/mattrick

User avatar
rowman
birds are dinosaurs
Posts: 556
Joined: Wed Jan 18, 2012 8:05 pm
Location: Melbourne

Post by rowman » Fri Aug 10, 2012 4:04 am

Got mine today, they look real nice thanks.

User avatar
mayanspring
Common Wiggler
Posts: 222
Joined: Sat Feb 04, 2012 12:07 am
Location: Brooklyn NY

Post by mayanspring » Sat Aug 11, 2012 5:18 pm

I posted this in a related thread... but will try here too...
if anyone is building a spare Euro one, I would totally buy it off you for your labor and skillz.
too busy to take on this complexity as an amateur electrician, but would love to have one.

User avatar
roman_f
Super Deluxe Wiggler
Posts: 1098
Joined: Sat Aug 06, 2011 11:36 am
Location: Pacific Northeast

Post by roman_f » Sun Aug 19, 2012 11:03 am

hey, guys

i've shipped some more

Goeran Stangeland
1xEURO
RA223044756RU

Mike Schmidt
2xBUchla
RA223044773RU

Greg Davis
1xEURO
RA223044787RU

Arne Derammelaere
1xEURO
RA223044827RU

Jon Baken
1xEURO
RA223044813RU

Matt Avent
2xEURO
RA223044835RU

i have 2 EURO and 2 BUCHLA kits left
+ 1 spare EURO panel

did i forget anyone?
thanks!

User avatar
Arnoid
Wiggling with Experience
Posts: 284
Joined: Mon Jan 25, 2010 4:32 am
Location: Belgium

Post by Arnoid » Mon Aug 20, 2012 4:06 pm

roman_f wrote:hey, guys

i've shipped some more


Arne Derammelaere
1xEURO
RA223044827RU

thanks!
hi there's a litlle mistake :) ?
I ordered a buchla set

User avatar
asterisk
Super Deluxe Wiggler
Posts: 1221
Joined: Sat Jun 19, 2010 11:37 am
Location: Burlington VT

Post by asterisk » Wed Aug 29, 2012 3:42 pm

my 266 PCBs arrived today!
wow, this is gonna be a big build, but im looking forward to it.

thanks roman!

jze
Learning to Wiggle
Posts: 23
Joined: Sun Sep 04, 2011 7:17 am

Post by jze » Sun Sep 09, 2012 5:06 am

just paypal you for an euro format

User avatar
Arnoid
Wiggling with Experience
Posts: 284
Joined: Mon Jan 25, 2010 4:32 am
Location: Belgium

Post by Arnoid » Tue Oct 09, 2012 1:48 am

received the 266 pcb's :hihi:
thx !

User avatar
keithwin
Learning to Wiggle
Posts: 31
Joined: Tue May 10, 2011 5:57 pm
Location: Stockport

Post by keithwin » Sun Jan 13, 2013 5:42 am

These still available?

User avatar
roman_f
Super Deluxe Wiggler
Posts: 1098
Joined: Sat Aug 06, 2011 11:36 am
Location: Pacific Northeast

Post by roman_f » Sun Jan 13, 2013 6:38 am

i think to set up rev2 preorder next week
at least for 5u and buchla

User avatar
raisinbag
Super Deluxe Wiggler
Posts: 1708
Joined: Thu Aug 18, 2011 11:40 pm

Post by raisinbag » Sun Jan 13, 2013 11:09 am

Hey roman, glad to see you around again ;). Quick question, for the 4006 which prefix did you use? Or anyone else for that matter. Does it HAVE TO BE CD? I'm just blabbing with some other people about this right now, so was curious if any old prefix will work ok in this build. I'm almost finished my version 1 builds. :tu:

User avatar
roman_f
Super Deluxe Wiggler
Posts: 1098
Joined: Sat Aug 06, 2011 11:36 am
Location: Pacific Northeast

Post by roman_f » Sun Jan 13, 2013 11:17 am

raisinbag wrote:Hey roman, glad to see you around again ;). Quick question, for the 4006 which prefix did you use? Or anyone else for that matter. Does it HAVE TO BE CD? I'm just blabbing with some other people about this right now, so was curious if any old prefix will work ok in this build. I'm almost finished my version 1 builds. :tu:
i did use CD4006 and HEF4006 and both worked good

rev2 PCBs would have some changes:
- errors corrected (in euro and 5u)
- opamps replaced with TL07X
- PIC-version of the noise chip added (besides the original one)
- brighness of the leds reduced
- ribbon cables are changed to headers
- 5U version would be on 2 big pcbs (not 1 big + 2 small)
- buchla panel layout has changed a bit (so rev1 panels won't fit, but i will also make repress of buchla rev1 pcbs for the ones who have original panels)
- i'm also opened to the offers of panel-designs for euro

i'll set up a dedicated post next week as find some time

User avatar
prscrptn
Super Deluxe Wiggler
Posts: 1865
Joined: Sun Apr 06, 2008 3:15 pm
Location: Chicago, IL USA

Post by prscrptn » Sun Jan 13, 2013 12:18 pm

...trying to generate some interest in Buchla panels for Rev.2!

Please post here or pm Rod Sterling Fan Club. :tu:

jnlkrt

Post by jnlkrt » Tue Jan 22, 2013 11:11 am

anyone can give me a rough number on the depth of euro version? how shallow will one get here at best?

User avatar
raisinbag
Super Deluxe Wiggler
Posts: 1708
Joined: Thu Aug 18, 2011 11:40 pm

Post by raisinbag » Tue Jan 22, 2013 11:37 am

roman_f wrote:
raisinbag wrote:Hey roman, glad to see you around again ;). Quick question, for the 4006 which prefix did you use? Or anyone else for that matter. Does it HAVE TO BE CD? I'm just blabbing with some other people about this right now, so was curious if any old prefix will work ok in this build. I'm almost finished my version 1 builds. :tu:
i did use CD4006 and HEF4006 and both worked good

rev2 PCBs would have some changes:
- errors corrected (in euro and 5u)
- opamps replaced with TL07X
- PIC-version of the noise chip added (besides the original one)
- brighness of the leds reduced
- ribbon cables are changed to headers
- 5U version would be on 2 big pcbs (not 1 big + 2 small)
- buchla panel layout has changed a bit (so rev1 panels won't fit, but i will also make repress of buchla rev1 pcbs for the ones who have original panels)
- i'm also opened to the offers of panel-designs for euro

i'll set up a dedicated post next week as find some time
Hey just curious what resistor value you used to reduce brightness of LEDS? I just noticed this post and can still easily swap out my LED associated resistors. Which resistors are they in fact? Just want to get the right ones.

Oh @spaceNbass, I'll measure mine when it is all together if no one replies to your depth question.

User avatar
amnesia
Super Deluxe Wiggler
Posts: 7131
Joined: Mon Sep 29, 2008 4:33 am
Location: 37 47 S 144 58 E

Post by amnesia » Sun Jan 27, 2013 9:23 am

would be great to get complete kit for buchla.

User avatar
Girts23
Wiggling with Experience
Posts: 390
Joined: Mon May 20, 2013 2:22 am

Post by Girts23 » Mon May 20, 2013 2:49 am

Hi, Roman! Could you, please, specify, what's the height of Bulcha style PCBs and a panel (was it 7"?)?
Thanx!

Anystereo
Learning to Wiggle
Posts: 4
Joined: Tue Sep 22, 2015 6:55 pm
Location: watertown, ma

266 pcbs

Post by Anystereo » Fri Sep 25, 2015 9:37 pm

Hi,

do you have 266 pcbs for sale still?

david

ualslosar
Wiggling with Experience
Posts: 330
Joined: Wed Mar 24, 2010 5:42 pm
Location: West Coast, USA

Post by ualslosar » Fri Sep 25, 2015 11:54 pm

Synthcube offers a kit as well as built up 266 modules in several formats

User avatar
mono-poly
Le Cheff
Posts: 5423
Joined: Fri Nov 21, 2008 3:40 pm
Location: Rotterdam, Netherlands

Post by mono-poly » Sat Sep 26, 2015 6:06 am

I got a 255 pcb set and panel i can let go.
The farad is the captain of my print.

http://www.mono-poly.nl
http://www.noodlebar.org

WTB blue lantern purple vco

Post Reply

Return to “Music Tech DIY”