tabulaRasa - Hybrid Wavetable Oscillator [ORDER PLACED]

raisinbag · Post by **raisinbag** » Wed Jun 06, 2012 9:23 pm

Thanks man. That's what I was looking for. Just a starting point. I'll keep you posted.

raisinbag · Post by **raisinbag** » Thu Jun 07, 2012 11:45 am

Ok I am now in Arduino land, a strange place of code words and binary mushrooms, I expect to see HR puff n Stuff come trotting by.

So I have uploaded some examples and made lights blink and stuff so I'm ready to upload the TabRas Program. is this it "tabulaRasa_Arduino_PWM.pde"????

I have looked around your site and downloaded package and this seems to make sense, but as I mentioned I am in new territory.

Once I have Uploaded, is it as simple as plucking out the 328 in the UNO and popping it in my TabRas?

This is sooooooo Exciting!!! Something totally new. Now I have to make my kids to learn code so that they can teach me

Thanks Greg for your help..

edit: I just noticed you mentioned an .ino file. I'll look around but I didn't see that file type when I was looking before?

surgesg · Post by **surgesg** » Thu Jun 07, 2012 1:24 pm

@raisinbag

No, you're right... .pde

The new arduino extension is .ino

Congrats, arduino is awesome and a rabbit-hole of possibilities. And yes, just pop the 328 out and pop it in.

janvanvolt · Post by **janvanvolt** » Thu Jun 07, 2012 2:57 pm

What code base are you using to have the reset feature ? I am unable to find it and mine definitely does not reset. ( i digged thru the arduino code and can't find any reference to a watchdog or similar function )

raisinbag · Post by **raisinbag** » Thu Jun 07, 2012 5:11 pm

Ya Fucking Hoooooooooooooooooo!!!!!!!!!!!!!!!! Omg I'm so excited!!!!!!!!! Thanks Greg so much. Ye haw!!!!!!!! Just swapped the old 328 and o74 (just incase) with a newly programmed 328 and new 074 and got sound right away. Holy crap! In the 10 seconds I got to play with it before dinner it was makIng some crazy sounds. I know what I'm doing tonight.
Again Greg, thanks so much for guiding me through the arduino stuff. I'll let you know if I can afford a few more of these on your next run.
That one stupid mistake I made fried a lot of things. I will be more carefull when I pull all night soldering parties.

surgesg · Post by **surgesg** » Thu Jun 07, 2012 5:12 pm

glad to hear it! post some recordings if you come up with anything good!

raisinbag · Post by **raisinbag** » Thu Jun 07, 2012 5:16 pm

Ok I certainly will. I also forgot to thank samuripizzacat for his behind the scenes help. Nate is a super helpful guy and a fair trader if you should ever have the opportunity to work with him! Thanks to you both. That was officially my biggest fu#k up. The build was easy and straight forward, so anyone looking to build should not be detered.

janvanvolt · Post by **janvanvolt** » Thu Jun 07, 2012 5:49 pm

It will always happen once :-) You really start to like more projects if either anything works from first time OR if it does not work and you get it working:

@raisinbag: I'm also in the process of compiling samples (fairlight original) for this wavetable.

great great thanks to gsurges for bringing this incredible fun and use tool :-)
my next fun tool is to get the 8x8 matrix onto a eurorack panel...

raisinbag · Post by **raisinbag** » Thu Jun 07, 2012 7:41 pm

Thanks janvanvolt, that was a PITA. It was a dumb move and could have been avoided easily. But I do tell my kids that the only bad mistake is one that you don't learn from. And look at this, I got the kick in the ass to get an arduino.

I have a snake corral as well and as soon as I get my zarlinks im gona build that up. I'm thinking euro/ frac as well so it will be fun to squeeze that all into one space.

surgesg · Post by **surgesg** » Sat Jun 16, 2012 11:24 pm

Okay - shooting for another run, aiming to place the order in a month (July 15th).

Let me know if you'd like one (even if you have already...) and I'll add you to the list!

$50 + $5 shipping ($8 international) for a PCB/Chip kit.

- Greg

EDIT -
The list:

I have received payment from those names in blue.

julian (1)
jaidee (1)
noisefor (1)
magneticstripper (2)
mOBiTh (2)
defenestration (2)
DreamLost (1)
Rowan (1)
L-1 (2)
lorobyy (2)
marvkaye (1)
nickster (2)
emalot (1)
clickmrmike (1)
Samuel Bryce (1)
mattrick (1)
Theta_Frost (1)
dBlicious (1)
Juxwl (1)
glitchpop (1)
Pfurmel (1)
luggi (1)
samUK (2)
mikecameron (1)
ringroad1 (1)
monstrinho (1)

julian · Post by **julian** » Fri Jun 22, 2012 4:31 pm

I would like 1-off

thanks,
julian

jaidee · Post by **jaidee** » Fri Jun 22, 2012 5:55 pm

One for me please.

noisefor · Post by **noisefor** » Fri Jun 22, 2012 8:49 pm

i'd like one please!

magneticstripper · Post by **magneticstripper** » Sat Jun 23, 2012 11:21 pm

+1 please

mOBiTh · Post by **mOBiTh** » Sun Jun 24, 2012 10:49 am

2 sets for me please!!

Lyncaster · Post by **Lyncaster** » Mon Jun 25, 2012 7:48 am

Does this require arduino or any programming?

L-1 · Post by **L-1** » Mon Jun 25, 2012 8:39 am

2 sets for me!

raisinbag · Post by **raisinbag** » Mon Jun 25, 2012 9:15 am

Lyncaster wrote:Does this require arduino or any programming?

It comes with a preburned chip. Only "programming" needed is to make your waves and put them on the sd card. I wouldnt realy consider it programming though. Greg has "an app for that"! Just download from his site.

Lyncaster · Post by **Lyncaster** » Mon Jun 25, 2012 9:58 am

Ill take one.

marvkaye · Post by **marvkaye** » Mon Jun 25, 2012 10:01 am

Put me down for one as well.......

<marv>

Lyncaster · Post by **Lyncaster** » Mon Jun 25, 2012 11:03 am

raisinbag wrote:
Lyncaster wrote:Does this require arduino or any programming?
It comes with a preburned chip. Only "programming" needed is to make your waves and put them on the sd card. I wouldnt realy consider it programming though. Greg has "an app for that"! Just download from his site.

Thanks!

nickster · Post by **nickster** » Mon Jun 25, 2012 12:08 pm

Put me down for one also please.

Barcode · Post by **Barcode** » Mon Jun 25, 2012 12:15 pm

I really shouldn't order one of these, but I so want to.... How long are you going to keep orders open?

Emalot · Post by **Emalot** » Mon Jun 25, 2012 1:41 pm

I love my first Tabularasa so i will take another one!!!
+1

surgesg · Post by **surgesg** » Mon Jun 25, 2012 2:44 pm

Barcode wrote:I really shouldn't order one of these, but I so want to.... How long are you going to keep orders open?

Probably another week or so?

MUFF WIGGLER

MUFF WIGGLER

tabulaRasa - Hybrid Wavetable Oscillator [ORDER PLACED]