Buchla(ish) 258(ish)

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Kent, lisa, luketeaford, Joe.

Post Reply
User avatar
brother303
Wiggling with Experience
Posts: 439
Joined: Mon Feb 15, 2010 9:01 am
Location: Ruhr-Area/Germany

Post by brother303 » Tue May 17, 2011 1:00 pm

Hi,
e-grad wrote:
brother303 wrote:any Wiggler from Germany here received his pcbs?
Just have received mine.

@J3RK, thanks for you efforts! Highly appreciated. :bacon:
Yeeesss,boards are in! :tu:

Thanks very much for this nice pcbs.
Peake wrote: DIY is all about the backlog. If you don't have a huge backlog, you aren't trying hard enough.

User avatar
Blinkar blå
Common Wiggler
Posts: 134
Joined: Sun Oct 11, 2009 5:00 pm
Location: Sweden

Post by Blinkar blå » Wed May 18, 2011 4:54 pm

How about Scandinavian wigglers? Anyone receive their boards yet? :cookiemonster:
“I ought to be chief,” said Jack with simple arrogance, “because I’m chapter chorister and head boy. I can sing C sharp.”

User avatar
J3RK
Super Deluxe Wiggler
Posts: 6691
Joined: Tue Dec 22, 2009 12:46 pm
Location: Seattle

Post by J3RK » Wed May 18, 2011 5:55 pm

There were about 5 packages to Sweden in the last batch of run one. Should be any day. :party:

User avatar
PF
Wiggling with Experience
Posts: 459
Joined: Sat Jan 02, 2010 8:18 am
Location: Sweden/Stockholm

Post by PF » Thu May 19, 2011 7:05 am

I got mine last week, also got the parts kits.....

jaidee
Common Wiggler
Posts: 196
Joined: Wed Jun 10, 2009 8:15 am

Post by jaidee » Thu May 19, 2011 8:47 am

Any boards landed in th UK yet?

Still waiting for mine...

User avatar
J3RK
Super Deluxe Wiggler
Posts: 6691
Joined: Tue Dec 22, 2009 12:46 pm
Location: Seattle

Post by J3RK » Thu May 19, 2011 2:43 pm

Run two boards arrived today. I will start packing these up on the weekend, and start shipping them out next week. (I think divided in two batches.)

User avatar
xi-bot
Common Wiggler
Posts: 154
Joined: Thu Jan 13, 2011 1:52 pm

Post by xi-bot » Thu May 19, 2011 6:29 pm

mine arrived yesterday in germany
thanks a lot !!!!!!!!!!!!!!!!!!!!!!!!!!!!!

User avatar
303monkey
Wiggling with Experience
Posts: 286
Joined: Tue Mar 03, 2009 6:52 pm
Location: Nodnol

Post by 303monkey » Fri May 20, 2011 2:58 am

Happy, Happy. Joy, Joy.

User avatar
Blinkar blå
Common Wiggler
Posts: 134
Joined: Sun Oct 11, 2009 5:00 pm
Location: Sweden

Post by Blinkar blå » Fri May 20, 2011 12:45 pm

Got my boards today! :party:
Thanks!
“I ought to be chief,” said Jack with simple arrogance, “because I’m chapter chorister and head boy. I can sing C sharp.”

User avatar
lazerkind
Wiggling with Experience
Posts: 326
Joined: Mon May 03, 2010 9:16 am
Location: mostly Sweden

Post by lazerkind » Sat May 21, 2011 12:28 am

Got mine as well, :sb:
All blue and shiny :love:
Thanks
//L

jaidee
Common Wiggler
Posts: 196
Joined: Wed Jun 10, 2009 8:15 am

Post by jaidee » Sat May 21, 2011 6:15 am

Boards have arrived!

Just need the parts kits now ;-)

User avatar
Luka
Super Deluxe Wiggler
Posts: 5383
Joined: Tue Jul 15, 2008 9:15 am
Location: melbourne

Post by Luka » Sat May 21, 2011 9:34 pm

mine haven't arrived yet :/
im not in a hurry as they are just going into a box and stored for a year
i just hope they didn't get lost in mail

polyroy
Ambient Wiggler
Posts: 3823
Joined: Wed Mar 31, 2010 6:01 pm

Post by polyroy » Sun May 22, 2011 2:12 am

Any of these left?

User avatar
J3RK
Super Deluxe Wiggler
Posts: 6691
Joined: Tue Dec 22, 2009 12:46 pm
Location: Seattle

Post by J3RK » Mon May 23, 2011 11:19 am

Luka wrote:mine haven't arrived yet :/
im not in a hurry as they are just going into a box and stored for a year
i just hope they didn't get lost in mail
I sent a few packages your direction in the last batch, so I'm pretty sure you'll be seeing them shortly. (just got a few PMs from people from various locations saying they got there boards, so it seems that a few are still floating around out there) Let me know if you don't see them soon.

User avatar
J3RK
Super Deluxe Wiggler
Posts: 6691
Joined: Tue Dec 22, 2009 12:46 pm
Location: Seattle

Post by J3RK » Mon May 23, 2011 11:22 am

Quick Run Two Update:

I didn't get a chance to start packing up the boards over the weekend as I had planned. (had birthday party for my daughters, and some other madness going on) I'm hoping to start this in the next couple of days.

A few have asked about extras from this run. I will VERY likely have a few extras, but want to get the main set of orders sorted first. If you PMed me, I will PM you back when I know what's left, and after that, will post here again if there are still some after those.

User avatar
J3RK
Super Deluxe Wiggler
Posts: 6691
Joined: Tue Dec 22, 2009 12:46 pm
Location: Seattle

Post by J3RK » Wed Jun 01, 2011 12:06 pm

Hey, it's been a bit since I logged in. Just wanted to give a quick update. I've been really slow on the run two boards, and I apologize. I had a huge security remediation thing going on at work, (basically had to fix 3300 security issues in a short period of time.) Ack! Then I got sick over the weekend, and am just back at work today. I will finish packing these up, and start shipping this week sometime. Once again, sorry for the delay. These will be out soon.

unintentional states
Common Wiggler
Posts: 152
Joined: Sun Nov 08, 2009 9:46 am

Post by unintentional states » Thu Jun 02, 2011 9:33 am

Anybody using beautyofdecay_'s BOM should take note that the 220pf and 100pf caps are a bit too big to provide adequate clearance for the ICs/sockets. Seems like ceramics are ideal anyway.

User avatar
Luka
Super Deluxe Wiggler
Posts: 5383
Joined: Tue Jul 15, 2008 9:15 am
Location: melbourne

Post by Luka » Thu Jun 02, 2011 3:50 pm

were mine in run 2 - they still havent arrived :(
i will only be at this address for a few more weeks

User avatar
beautyofdecay_
no maps for this area
Posts: 336
Joined: Sun Feb 27, 2011 2:26 pm
Location: Netherlands

Post by beautyofdecay_ » Thu Jun 02, 2011 4:36 pm

unintentional states wrote:Anybody using beautyofdecay_'s BOM should take note that the 220pf and 100pf caps are a bit too big to provide adequate clearance for the ICs/sockets. Seems like ceramics are ideal anyway.
Yes, I should have mentioned that...
I could still solder the specified caps to the board but it is not ideal.

User avatar
J3RK
Super Deluxe Wiggler
Posts: 6691
Joined: Tue Dec 22, 2009 12:46 pm
Location: Seattle

Post by J3RK » Fri Jun 03, 2011 3:20 pm

Luka wrote:were mine in run 2 - they still havent arrived :(
i will only be at this address for a few more weeks
Yours were definitely in run 1. I believe they were shipped in the last batch to go out, but that was a while back now. I will do some checking tonight. I have all the receipts and customs forms for them. Sorry to hear yours didn't make it yet. I have waited for up to 2 weeks for some international orders in the past, but this has been longer than that. I'll see what I can find out.

User avatar
J3RK
Super Deluxe Wiggler
Posts: 6691
Joined: Tue Dec 22, 2009 12:46 pm
Location: Seattle

Post by J3RK » Tue Jun 07, 2011 12:01 am

Luka wrote:were mine in run 2 - they still havent arrived :(
i will only be at this address for a few more weeks
Just PMed you. We'll get this sorted ASAP. I have all my docs, customs forms, etc. here. Let's make sure I didn't mislabel the package or something like this.

User avatar
J3RK
Super Deluxe Wiggler
Posts: 6691
Joined: Tue Dec 22, 2009 12:46 pm
Location: Seattle

Post by J3RK » Tue Jun 07, 2011 12:07 am

Ok, all of the run two orders have been packed up, and are ready to go. I need to fill out customs forms for the international orders. I can't find my stack of forms, so I'll need to pick them up tomorrow. I'll drop all of these off at the PO on Wednesday or Thursday, and that will be that. :party:

I do have a stack of a few extras, though I'm not sure if I have enough for everyone that's asked. I also have to make sure I hold onto a few in case something went wrong with Luka's order.

I may be able to do something like sell one board to each person that PMed me after the fact, so that everyone can at least get one of them. I'll just need a little bit of time to get this figured out. I'll post, and reply to the PMs as soon as that happens. (sometime in the next few days I'd think) I apologize for my slow response times right now. I have a lot going on, but will definitely respond to everyone, and get these remaining boards distributed as fairly as possible.

I can do another run at some point in the future, but since I don't even have enough time to effectively work on my other projects and designs right now, I'll be holding off on that for a bit. I don't want to get into a position where I can't deliver things on time, or something like that.

Thanks for all the orders on this project, and I've been really excited to see all the cool mods, panels, ideas in the build-thread. Some amazing work there.

I'll post news on this last little stack as soon as I can.

Thanks!

Brownian Lotion
Continuous random talk
Posts: 385
Joined: Sun Sep 19, 2010 8:39 pm

Post by Brownian Lotion » Sat Jun 11, 2011 3:55 am

I haven't received anything yet either (also in Australia)... I'm assuming I'm in run two?

All good really, I won't get a chance to solder anything for a few weeks yet anyways.

Speaking of which, who is selling the parts kits? (PF, you caught my interest here!)
Will module for food.

User avatar
J3RK
Super Deluxe Wiggler
Posts: 6691
Joined: Tue Dec 22, 2009 12:46 pm
Location: Seattle

Post by J3RK » Mon Jun 13, 2011 12:56 pm

BL: I know I saw you in one of the batches (and I believe it was from run two.)



I had one more delay, and have only sent a few from this batch so far. This was on Friday, so a few people should start seeing run two boards shortly. The rest will go out in the next couple of days.



As far as the "extras pile" it looks like one package from run one (out of around 100+) didn't make it to the destination, so I have a few less than I thought. (need to make sure that's re-filled before I consider them extras) If you asked for them after the order was completed, I'll do my best to get you something from this pile, but it will be a bit longer than I thought.

User avatar
terrafractyl
Fractal Wiggler
Posts: 432
Joined: Thu Apr 08, 2010 9:33 pm
Location: Melbourne

Post by terrafractyl » Mon Jun 13, 2011 1:09 pm

I'm pretty sure mine are sitting at home in Australia... thanks!
I cant wait to get home from the US to start building them, one question,
Could someone let me know the Current draw on 15v?

I looked through this thread but coudnt find this, and I'm trying to work out how many modules I can cram into a suitcase on a 500ma power supply
thanks in advance!
'People forget that the brain is the biggest erogenous zone' -- Jackie Treehorn
Latest Album-=-Hypnagog Soundcloud-=-Kinematic Records Website

Post Reply

Return to “Music Tech DIY”