A case for Jasper

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: luketeaford, lisa, Kent, Joe.

Post Reply
deram
Learning to Wiggle
Posts: 5
Joined: Wed Jan 20, 2016 8:10 am
Location: Belgium

Post by deram » Mon Oct 03, 2016 4:51 am

Please put me on the list for 1(original in wood)

elterotero
Learning to Wiggle
Posts: 4
Joined: Thu May 26, 2016 1:29 am
Location: Finland

Post by elterotero » Thu Oct 06, 2016 9:15 am

Up for 1 wooden

User avatar
The_Crooked_Man
mad man with a box
Posts: 673
Joined: Thu Jan 21, 2010 6:49 pm
Location: Philadelphia

Post by The_Crooked_Man » Thu Oct 06, 2016 12:43 pm

Since I tossed my hat into the ring before there was talk of the plastic case, I figured I'd might as well affirm that I'm still up for the wooden version :guinness:

User avatar
mOBiTh
Super Deluxe Wiggler
Posts: 1992
Joined: Sun May 20, 2012 2:20 pm

Post by mOBiTh » Fri Oct 07, 2016 12:44 pm

If it looks as crazy and good as the pics I'll take a stripy acrylic one, otherwise wood is fine :)

User avatar
crustibooga
Common Wiggler
Posts: 123
Joined: Sun Jul 28, 2013 2:52 am
Location: London
Contact:

Post by crustibooga » Thu Oct 13, 2016 6:31 am

Update 4 - 13 October

Still waiting on the imminent arrival of the CNC.

The base is being redesigned and all kits will now come with an 8xAA battery holder that will be easily accessed on the base.

I'm hoping the next update will be a video/photos of the actual kit built. Hopefully by the weekend of 22/23 Oct.

User avatar
a100user
All the gear, no idea!
Posts: 4033
Joined: Thu Mar 13, 2008 4:39 am
Location: Southern England

Post by a100user » Thu Oct 13, 2016 7:12 am

crustibooga wrote:Update 4 - 13 October

Still waiting on the imminent arrival of the CNC.

The base is being redesigned and all kits will now come with an 8xAA battery holder that will be easily accessed on the base.

I'm hoping the next update will be a video/photos of the actual kit built. Hopefully by the weekend of 22/23 Oct.
Nice work, looking forward to seeing the pics etc :)
I'm looking for nothing at this moment in time

User avatar
keninverse
Super Deluxe Wiggler
Posts: 1013
Joined: Mon Jul 26, 2010 4:12 pm
Location: mission control htx

Post by keninverse » Thu Oct 13, 2016 9:16 am

Please put me down for a case.

User avatar
flippantminister
0118 999 881 999 119 7253
Posts: 493
Joined: Wed May 07, 2008 11:03 am
Location: birmingham, alabama

Post by flippantminister » Thu Oct 13, 2016 9:36 am

i'd love to get in on a wooden one, please.

User avatar
nologin
Common Wiggler
Posts: 201
Joined: Thu Jan 21, 2016 2:53 am
Location: France

Post by nologin » Thu Oct 13, 2016 5:05 pm

Sorry Crustibooga, removes me from the waiting list. I was too impatient, so i started a DIY case, solid oak. Which is far from finished, but has already begun.
I could not bear to see this synthesizer without carnal envelope, naked in a cardboard box.

Image


So i can not take one of your cases, i have another one under build.

Sir Ruff
Super Deluxe Wiggler
Posts: 1956
Joined: Tue Jun 02, 2009 6:23 pm
Location: Philadelphia
Contact:

Post by Sir Ruff » Thu Oct 13, 2016 5:17 pm

Please add my name as well to the case list!

User avatar
crustibooga
Common Wiggler
Posts: 123
Joined: Sun Jul 28, 2013 2:52 am
Location: London
Contact:

Post by crustibooga » Fri Oct 14, 2016 1:27 am

No worries, it's being a long long wait for it all to get together.

Nice to see a Jasper in clothes :mrgreen: Good job! :yay:

nologin wrote:Sorry Crustibooga, removes me from the waiting list. I was too impatient, so i started a DIY case, solid oak. Which is far from finished, but has already begun.
I could not bear to see this synthesizer without carnal envelope, naked in a cardboard box.

Image


So i can not take one of your cases, i have another one under build.

User avatar
nologin
Common Wiggler
Posts: 201
Joined: Thu Jan 21, 2016 2:53 am
Location: France

Post by nologin » Fri Oct 14, 2016 4:56 am

This is not finished on the photo, it holds in balance. (This is just a preview) I will cut an oblique flank to the keyboard. Missing lower wooden chopsticks and above the keyboard. And the wood hue.
By against too long to make a DIY case at hand.
I spent more hours on it than on electronic assembly ... :doh:

User avatar
demian
Wiggling with Experience
Posts: 387
Joined: Mon Aug 16, 2010 3:54 am
Location: da Lowlands

Post by demian » Fri Oct 14, 2016 5:27 pm

I am in for 2 wooden cases.

User avatar
peAk
Common Wiggler
Posts: 71
Joined: Tue May 12, 2015 10:36 pm
Location: Houston, TX

Post by peAk » Tue Oct 18, 2016 7:39 am

In for a wooden case

User avatar
SMonk
Common Wiggler
Posts: 54
Joined: Wed Dec 03, 2014 1:53 pm
Location: Sweden

Post by SMonk » Wed Oct 19, 2016 6:04 am

Interested in one wooden case.

mrmrshoes
Learning to Wiggle
Posts: 25
Joined: Wed Oct 31, 2012 1:31 pm

Post by mrmrshoes » Thu Oct 20, 2016 4:47 am

can I be put down for a wooden case?

User avatar
Mr. Mulcahy
Common Wiggler
Posts: 55
Joined: Thu Mar 17, 2016 10:35 am
Location: The New World

Post by Mr. Mulcahy » Thu Oct 20, 2016 5:09 pm

Please one here too!

ulibe
Learning to Wiggle
Posts: 2
Joined: Sun May 15, 2016 2:27 pm
Location: German

Post by ulibe » Mon Oct 24, 2016 3:49 am

This case is verry nice. Could you put me on your list to get one, please?

Sparky
Common Wiggler
Posts: 179
Joined: Tue Sep 02, 2014 10:21 am
Location: California, USA

Post by Sparky » Mon Oct 24, 2016 10:25 am

clarifying my early post: I'll take 3 wood please.

User avatar
rv0
Learning to Wiggle
Posts: 29
Joined: Mon Mar 15, 2010 5:57 pm

Post by rv0 » Mon Oct 24, 2016 3:23 pm

interested in 3 wood
x0xlarge cpu mod for x0xb0x and more: http://www.rv0.be

User avatar
LektroiD
Super Deluxe Wiggler
Posts: 1382
Joined: Tue Oct 20, 2009 1:55 am
Location: Scotland

Post by LektroiD » Tue Oct 25, 2016 12:39 pm

Just to clarify, I'm interested in 1x wood and 1x perspex for now.

I'll be building another 3 Jaspers in the near future, so I'll be ordering another 3, possibly perspex, depending on price...

What length screws will we need to fix from the bottom?

User avatar
mattrick
Common Wiggler
Posts: 188
Joined: Wed Apr 18, 2012 10:16 pm
Location: Madrid, New Mexico, USA

Post by mattrick » Fri Oct 28, 2016 1:54 pm

tentatively interested in 3 sets of wood, or maybe 2 wood, 1 perspex.

i might get impatient and do my own though. sorry for the vagueness, i just want to get on the list before it gets any longer.

thank you.
san pedro labs | creative audio electronics | custom synth manufacture
my work: http://sanpedrolabs.com
my music: http://www.soundcloud.com/mattrick

User avatar
The_Crooked_Man
mad man with a box
Posts: 673
Joined: Thu Jan 21, 2010 6:49 pm
Location: Philadelphia

Post by The_Crooked_Man » Fri Oct 28, 2016 3:48 pm

[quote="nologin]Image[/quote]

Ooooh, I'd love to get a case without the extra, what?, 4 inches in back where the speaker goes since I have no intention of using mine with a shite speaker (or batteries).

User avatar
crustibooga
Common Wiggler
Posts: 123
Joined: Sun Jul 28, 2013 2:52 am
Location: London
Contact:

Post by crustibooga » Sun Oct 30, 2016 3:59 am

Update 5 - 30 October

At long last the CNC has finally arrived!! :yay: :bananaguitar: Currently I'm setting it up and should take a few days. Then prototype time and hopefully next weekend I'll start manufacturing the parts and will begin taking orders.

I'm working with Altitude and AFX to accommodate their midi board, so will probably need to know at the time of ordering if this is required.

User avatar
crustibooga
Common Wiggler
Posts: 123
Joined: Sun Jul 28, 2013 2:52 am
Location: London
Contact:

Post by crustibooga » Sun Oct 30, 2016 4:02 am

Hi Crooked, good idea, maybe I could do this as an option as I'm sure there'll be others who are thinking along these lines.

Whilst I get the first batch cut I'll sort out a drawing for this.


The_Crooked_Man wrote:[quote="nologin]Image
Ooooh, I'd love to get a case without the extra, what?, 4 inches in back where the speaker goes since I have no intention of using mine with a shite speaker (or batteries).[/quote]

Post Reply

Return to “Music Tech DIY”