[Expander available] "Anushri" PCB's with eurorack

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: luketeaford, lisa, Kent, Joe.

Post Reply
User avatar
skookum
Common Wiggler
Posts: 222
Joined: Thu Apr 16, 2015 3:17 pm
Location: Fanny Bay, BC

[Expander available] "Anushri" PCB's with eurorack

Post by skookum » Fri Jan 22, 2016 1:23 pm

Expander PCB and panel available again. Get yours today!
CLICK HERE TO ORDER. :party:

Image

skookumsynth.com/anex for more info and BOM.


FIRST RUN OF PANELS & KNOBS SOLD OUT. PCB's AVAILABLE AT MODULAR ADDICT.
If you're interested in a panel still, let me know for the future.

A couple of times I've had requests to build the Mutable Instruments “Anushri” but I've never been able to find PCBs to buy.
After checking kosherness with Olivier I am going to do a run of boards, keeping what I think I might need now and in the future and then sell the remainder.

PCBs: $40
Panel: $60 (preliminary)
Knobs: $25
Shipping: at cost, location dependant, TBD.

Image

This is an interest check to see if anyone around here is interested in a set of boards. The size of the pcb run will depend partially on interest.
I am not looking for anything up front, other than serious interest only. A list will be made and when manufactured and shipped, they can be paid for. They are a couple of fairly big boards and I expect a small run, so estimate about $40-50 for the set of two.

The boards will have some substitutions and modifications, such as “thonkiconn” jacks, D6R buttons, easier to source toggles and a slightly modified euro power section. This is done to better match my stock of parts and an updated BOM will be provided.

It will be sold and supported by me, nothing to do with Mutable Instruments except the licensing. They will be rebranded appropriately to reflect this.

If there’s enough interest I may offer eurorack aluminum front panels as well. I would like some for myself, but they will be expensive in the low quantity I'm expecting (~$60) so it’ll only go ahead if enough people express interest. Absolute minimum 10 peeps. The panel would not be compatible with MI’s original release, and have my own design on it.
If interest in this panel is sufficient I can offer SIFAM “intelljel” style knobs to go with it as well.

In short, if you'd like to buy a set of “Anushri” PCBs and/or a front panel to build a kick ass little box or module, express your serious interest. The PCB’s are going ahead either way, panel/knobs is interest dependent.

ADDENDUM: There is apparently demand for eurorack panels compatible with MI's original release. If you're interested in just a panel, note your interest. Same conditions as above.

edit: Files are on github as per license.

https://github.com/skookumsynth/anookum
Last edited by skookum on Sun Mar 11, 2018 12:14 pm, edited 30 times in total.

User avatar
Altitude909
Super Deluxe Wiggler
Posts: 3481
Joined: Wed Aug 24, 2011 5:13 pm
Location: Meesheegan

Post by Altitude909 » Fri Jan 22, 2016 1:55 pm

I'd like to see your layout for alternate jacks, I looked at this way back and there wasn't a way to change those while keeping the layout the same for the panel and enclosure. I suppose if you plan on doing your own panels and enclosures that's fine though..

User avatar
skookum
Common Wiggler
Posts: 222
Joined: Thu Apr 16, 2015 3:17 pm
Location: Fanny Bay, BC

Post by skookum » Fri Jan 22, 2016 3:43 pm

Yes of course! I learned lesson in copy-pasting old thread drafts.
The jacks do have a slightly wider spacing and as such it differs from original pcb's.

User avatar
LudfisterSound
Common Wiggler
Posts: 88
Joined: Sun Jul 21, 2013 1:18 am
Location: Anaheim

Post by LudfisterSound » Fri Jan 22, 2016 9:38 pm

I've been interested in doing this myself for a while now... So I'm interested in at least a PCB set probably a euro panel as well.

User avatar
Barcode
Ultra Wiggler
Posts: 843
Joined: Sun Nov 20, 2011 12:12 pm
Location: The Wasatch Front

Post by Barcode » Fri Jan 22, 2016 9:52 pm

Updated to add an interest for PCB, Panel, and Knobs.

+1 On different jacks.... Make it so the kobiconns or thonks will fit please!!!!

Put me down for a full set. I miss my Anushri.....
Last edited by Barcode on Wed Jan 27, 2016 4:40 pm, edited 2 times in total.

User avatar
TripJ
Common Wiggler
Posts: 122
Joined: Thu Aug 27, 2015 12:33 am
Location: VA

Post by TripJ » Sat Jan 23, 2016 12:14 am

I'm seriously interested in PCBs. Maybe even a pair of sets.

gwash
Learning to Wiggle
Posts: 8
Joined: Mon Sep 16, 2013 9:57 am

Post by gwash » Sat Jan 23, 2016 2:42 am

I'd be in for a eurorack panel and knobs

User avatar
skookum
Common Wiggler
Posts: 222
Joined: Thu Apr 16, 2015 3:17 pm
Location: Fanny Bay, BC

Post by skookum » Sat Jan 23, 2016 12:09 pm

+1 On different jacks.... Make it so the kobiconns or thonks will fit please!!!!

Put me down for a set of PCB's. I miss my Anushri.....
I believe the Kobiconns fit in a thonkiconn footprint. With a bit of clipping to the legs and the manual ground wire it should work I think. Feel free to correct me here, I don't have any Kobis on hand.
I'd be in for a eurorack panel and knobs
I'm very happy you're interested, but unfortunately the panel is only compatible with these PCB's, it will not work with MI's original release.

euromorcego
Super Deluxe Wiggler
Posts: 2758
Joined: Sat Jan 18, 2014 6:22 am

Post by euromorcego » Sat Jan 23, 2016 12:37 pm

skookum wrote: ..., but unfortunately the panel is only compatible with these PCB's, it will not work with MI's original release.
that is unfortunate. I'd also be interested in a panel, but only if it fits the original pcb (still have an acrylic Anushri that wants to be converted).

edit: still interested in eurorack panel for original pcb (a bit depending on price, so a few people should sign up)
Last edited by euromorcego on Tue Jan 26, 2016 5:21 pm, edited 1 time in total.

User avatar
fluffymuff
Common Wiggler
Posts: 134
Joined: Sat Jan 24, 2015 7:41 am
Location: Leeds

Post by fluffymuff » Sat Jan 23, 2016 3:51 pm

there is a thread on the Mutable Instruments forum about this exact subject so you might want to post on there as there is already a waiting list of 25 people wanting this (including me!)

http://mutable-instruments.net/forum/di ... ng-list/p1

User avatar
skookum
Common Wiggler
Posts: 222
Joined: Thu Apr 16, 2015 3:17 pm
Location: Fanny Bay, BC

Post by skookum » Sat Jan 23, 2016 5:49 pm

Well, maybe it is time to fulfill a pent up demand?
Editing original thread.

User avatar
yan6
Ultra Wiggler
Posts: 967
Joined: Sat Jun 15, 2013 7:14 pm
Location: Ontario, Canada

Post by yan6 » Sat Jan 23, 2016 9:18 pm

Interested in a PCB if a panel becomes available

User avatar
oberkorn
Veteran Wiggler
Posts: 611
Joined: Tue Jan 18, 2011 6:30 am
Location: in the EU

Post by oberkorn » Sun Jan 24, 2016 1:55 am

interested in boards and knobs
maybe also panel depending on design

User avatar
SMonk
Common Wiggler
Posts: 54
Joined: Wed Dec 03, 2014 1:53 pm
Location: Sweden

Post by SMonk » Sun Jan 24, 2016 4:57 am

I'm interested in a eurorack panel for the MI original PCB design. Maybe even two.

herrprof
Learning to Wiggle
Posts: 9
Joined: Thu Jul 30, 2015 10:57 am

Post by herrprof » Tue Jan 26, 2016 11:13 am

+1 for the ori. panel, especially if the price comes down.

User avatar
synchromesh
Wiggling with Experience
Posts: 478
Joined: Wed Feb 09, 2011 5:30 am
Location: Norfolk, England
Contact:

Post by synchromesh » Tue Jan 26, 2016 4:39 pm

I would be interested in a PCB set and matching panel. Thanks for doing this! :tu:

EDIT: And knobs as well, why not!?
Last edited by synchromesh on Wed Jan 27, 2016 4:23 am, edited 1 time in total.

User avatar
frozenkore
Super Deluxe Wiggler
Posts: 1077
Joined: Thu Oct 08, 2009 4:19 pm
Location: Highland, IN

Post by frozenkore » Tue Jan 26, 2016 4:43 pm

I'm interested in a eurorack panel and pcb.
Cheers!
Brian

User avatar
skookum
Common Wiggler
Posts: 222
Joined: Thu Apr 16, 2015 3:17 pm
Location: Fanny Bay, BC

Post by skookum » Tue Jan 26, 2016 4:46 pm

Thanks for your interests, getting closer to the numbers!
"Flux it, we'll do it live!" - Instagram - Github

User avatar
Crashlander42
Common Wiggler
Posts: 207
Joined: Sun Jun 24, 2012 12:20 pm
Location: Winter Park, FL
Contact:

Post by Crashlander42 » Tue Jan 26, 2016 4:55 pm

Interested in a PCB+Panel

4floorsofwhores
Common Wiggler
Posts: 233
Joined: Sun Feb 16, 2014 12:41 am
Location: Notts Uk

Post by 4floorsofwhores » Tue Jan 26, 2016 7:00 pm

Definitely 1 board and panel please
edit: knobs too
Last edited by 4floorsofwhores on Tue Jan 26, 2016 11:46 pm, edited 1 time in total.
Careful now

User avatar
synthdude
Common Wiggler
Posts: 165
Joined: Thu Dec 17, 2015 5:09 pm
Location: Pacific northwest

Post by synthdude » Tue Jan 26, 2016 7:13 pm

Im in for pcbs/panel/knobs.

User avatar
Useful Noise
Common Wiggler
Posts: 146
Joined: Tue Jun 17, 2014 1:55 pm

Post by Useful Noise » Tue Jan 26, 2016 7:22 pm

Interested in a PCB Knobs and Panel.

User avatar
audiohawk
Common Wiggler
Posts: 136
Joined: Fri Dec 12, 2014 7:48 pm
Location: Tugaland

Post by audiohawk » Wed Jan 27, 2016 12:22 pm

Count me in for 1 set of PCBs and panel.
Maybe knobs...
Thank you for your work :hail:

User avatar
shredsickgnar
Wiggling with Experience
Posts: 290
Joined: Sun Oct 11, 2015 4:22 am
Location: Canada

Post by shredsickgnar » Wed Jan 27, 2016 12:44 pm

I'd be interested in PCB, Knobs, and Panel.
https://soundcloud.com/advancedelectric
Latest Ambient youtube performance vid::
https://youtu.be/xfWiDTkIyKo
[bandcamp width=100% height=120 album=695091456 size=large bgcol=ffffff linkcol=0687f5 tracklist=false artwork=small]

User avatar
skookum
Common Wiggler
Posts: 222
Joined: Thu Apr 16, 2015 3:17 pm
Location: Fanny Bay, BC

Post by skookum » Wed Jan 27, 2016 4:14 pm

Ok, excellent! There is enough interest to make a PCB/panel/knob combo feasible. :party:

I'm about to send off for a proto of the new boards (so I can find out what mistakes I've made).
While waiting, the panel design should be finalized. If the PCB's come back OK I will be working on getting the panels sorted from the local shop.
"Flux it, we'll do it live!" - Instagram - Github

Post Reply

Return to “Music Tech DIY”