I like in modular the modulations but also the ability to been able to build new electro acoustic interfaces. For example a percussion synth machine. With the peak & hold I can play melodies with a Conga on my patches. If I hit hard the melody goes up or down depending on the algo you use on the pea...

Since I happen to have three of the most “pingable” filter modules in my rack, I thought it would be interesting to attempt a comparison. [soundcloud url="https://api.soundcloud.com/tracks/321033230" params="auto_play=false&hide_related=false&show_comments=true&show_user=true&show_reposts=false&vis...

I've been asking myself the same question, not only high end Mixers but above average Mixers. My conclusion is that I need to test these things, so my idea was to shout out in my aera if someone has a mixer I would like to try out and voila, I found someone that is willing to show me his Allen & Hea...

I must say this idea that all samplers must be purpose-built with drum beats in mind is tiresome. That said, I'm no fan of the sampler as a "record your synth sound, then ditch the synth" paradigm either. I'd like to see samplers with operating systems that easily allow one to set up multi-sample "...

Using here Antimatter to throw the Delay Feedback into Soundstage from Worng. It does the job very well.

Angle Grinder is kind of key in this patch:

If you like dirty check out Schlappi Engeneering...

I havent been able to tune my metasonix osc. The Bastl can't do a lot here you would need a hz to volt converter.

Just buy a RME UFX. RME is well known for super frivers, supporting their products more than 10 years and really nice sounding clean converters. Working with Eurorack and RME is a joy because you will hear the difference. Wiht the software I can use different routing templates for different usercase...

e-grad wrote: ↑

Wed Dec 23, 2020 8:24 am

The Microphonic-soundbox might be of interest to you as well.

This together any CG Products or Cg products on its own do work well as interface for anything you connect. Especially with the peak & hold...

Slightly different question: what is the difference in sound between the Klangbau Twin Peaks Filter (with joystick) and the Twin Peaks Resonator? I had the Klangbau Joystick version and ended up with the version with knobs just because the joystick is too wild. Once I found a sweet spot with the tw...

I don't know why but doepfer Oscs are always so powerful. Simple waveforms wit a little bit of analog colourful saturation and I'm more happy. Never had the same feeling with an analog synth out there...

I would have a look into the Peak & Hold from Cg products. Definetly a very handy kind of a envelope follower. Actually designed for percussion (with a pickup) so you could even experiment with an acoustic guitar but also go directly in with a electric guitar (it has a build in amplifier). The built...

Just wanted to pass along the speedy response from Torso about the above questions, as well as bluetooth-- "Yes will make a midi effect unit mode that lets you manipulate incoming midi. All the embedded algorithms inside T-1 can affect the incoming midi. This function will be available when the uni...

t0nmontana wrote: ↑

Mon Oct 05, 2020 7:26 pm

You guys....I think I might have a problem...IMG_3833.jpg

Looks like a feedback festival to me.

There are 3 technologies that replaced ADAT as new standards for multichannel audio: AVB, MADI and Dante. https://www.presonus.com/learn/technical-articles/an-introduction-to-avb-networking https://en.wikipedia.org/wiki/MADI https://en.wikipedia.org/wiki/Dante_(networking) Another, Ravenna/AES67 - ...

I'm a bit in the same boat at the moment.
I have a RME and a Es-3 but only used it yet for cv.
But I don't get it right what other options do you have beside from adat. Adat has been around for a while, is there something else (newer?)

Not who you asked, but right now I'm patching some drums into the Sarajewo and then taking each tap out into their own channel of the Instruo Tanh for feedback limiting and then into a mixer with some pan automation, I then run this mix into the Katowice and play with the various bands in the Katow...

I can't help with that specific hardware but the RME software is capable of all the stuff you mentioned. I use an old Ramsa DA7 and a Digiface USB. It has fader layers so I have the mixer's analog inputs 1-16 going into the computer over ADAT to record and then on a second layer 17-32 stuff coming ...

Hey all I'm still considering an analog mixer for my setup and I have been researching endless. I want the flexibility of EQs and send effects. I want to record synths and Eurorack and also play back Stems from Ableton Live. I have an RME 802 which I love and I'm starting to enjoy the Total Mix Soft...

Dude thanks for that!!

Why don't he just offers those who don't want to wait the old version? I wouldn't mind...

I never pull the trigger for fancy new filters but this
I like simple but innovative designs with character in the sound. And the pinging sounds are there.
Definetly the filter I was looking for my live rack.

What audio Interface are you using?

TemplarK wrote: ↑

Tue Dec 08, 2020 9:08 pm

revtor wrote: ↑

Tue Dec 08, 2020 12:54 pm

I’m 100% for at least biweekly updates, even if it’s “ hey guys nothing new to report still waiting on XYZ.”

Oh hell yeah!!!

I'm back in for the updates xDDDDD

Updates? I now saved a lot of money for not having to go to my psychologist since I unsubscribed from those weekly essays.