Search found 465 matches

by desolationjones
Fri Oct 30, 2020 8:08 am
Forum: Eurorack Modules
Topic: Metabolic Devices - Moonwalker & Papomi
Replies: 8
Views: 210

Re: Metabolic Devices - Moonwalker & Papomi

I like these designs more the longer I look at them. Unlike Coherence, these modules are both simple enough to remember the functions 100% with such graphics; no worse than any Make Noise offering in that regard. The V/oct glyph is cracking me up (it's a little keyboard!). Papomi is a simple enough ...
by desolationjones
Tue Oct 27, 2020 2:38 pm
Forum: Eurorack Modules
Topic: CV and Sync bus - Whats the situation in 2020?
Replies: 31
Views: 688

Re: CV and Sync bus - Whats the situation in 2020?

I find one should have put Rst & Clock or full MIDI on them (or at least tried to get to a common place amongst manufacturers) but now it is too late. I don't understand how it is too late? These lines are already being used for full MIDI with no hardware compatibility disagreements AFAIK. Select B...
by desolationjones
Tue Oct 27, 2020 1:44 pm
Forum: Eurorack Modules
Topic: CV and Sync bus - Whats the situation in 2020?
Replies: 31
Views: 688

Re: CV and Sync bus - Whats the situation in 2020?

I find one should have put Rst & Clock or full MIDI on them (or at least tried to get to a common place amongst manufacturers) but now it is too late. I don't understand how it is too late? These lines are already being used for full MIDI with no hardware compatibility disagreements AFAIK. Select B...
by desolationjones
Tue Oct 27, 2020 12:09 pm
Forum: Eurorack Modules
Topic: CV and Sync bus - Whats the situation in 2020?
Replies: 31
Views: 688

Re: CV and Sync bus - Whats the situation in 2020?

I wasn't aware that Voltage Block doesn't work with Rene. The issue might be that Rene does not send individual preset save message for each program. It only sends a "save global" message, expecting the receiving modules to hold 64 or so presets in some kind of edit buffer. But that doesn't work wi...
by desolationjones
Mon Oct 26, 2020 6:14 pm
Forum: Eurorack Modules
Topic: Mungo Enterprises c1, convolution, delay, sampler
Replies: 55
Views: 5136

Re: Mungo Enterprises c1, convolution, delay, sampler

Mungo @ SuperBooth 2016 demoing the c0 and g0. Was just posted this month for some reason but it's a cool demo for the bit bucket mode.
by desolationjones
Sat Oct 24, 2020 9:19 am
Forum: Eurorack Modules
Topic: Nearness and LRMSMSLR
Replies: 9
Views: 222

Re: Nearness and LRMSMSLR

Mutable Veils provides 4 channels of amplification.

S will contain less of the voices patched towards center and more of those towards the sides. Like if the "slightly left of center" input on nearness puts 5v of that signal left and 4v right, the side signal would contain 5-4=1v of that voice.
by desolationjones
Tue Oct 20, 2020 5:48 pm
Forum: Eurorack Modules
Topic: Endorphin.es Running order ; two track trigger sequencer
Replies: 12
Views: 468

Re: Endorphin.es Running order ; two track trigger sequencer

Thanks for sharing! I find that the repeats function while externally clocked creates much more useful results for my needs. Have you played much yet with external clocking, or using channel 1 output to reset channel 2?
by desolationjones
Wed Oct 14, 2020 7:49 am
Forum: Eurorack Modules
Topic: Alternatives to Rings in 2020
Replies: 79
Views: 3197

Re: Alternatives to Rings in 2020

Consider the c1 instead of the d0 if you are wanting a more compact resonator/PM setup. d0 is more "modular" since it is just two incredibly flexible delay lines, but you will be engaging a lot of filters, VCAs, EQs, compressors, etc. in your quest for sick feedback. Nothing wrong with that, in fact...
by desolationjones
Mon Oct 12, 2020 6:29 pm
Forum: Eurorack Modules
Topic: Endorphin.es Running order ; two track trigger sequencer
Replies: 12
Views: 468

Re: Endorphin.es Running order ; two track trigger sequencer

A scientific approach reveals strange interactions between channel 1 & 2 when clocked externally. Adjusting repeats on one seems to lag or mute the other. Endorphin.es crew, can you comment on this? It occurs regardless of sync. Edit: having a hard time replicating. Possibly I'm just a noob. Edit 2:...
by desolationjones
Mon Oct 12, 2020 3:07 pm
Forum: Eurorack Modules
Topic: Endorphin.es Running order ; two track trigger sequencer
Replies: 12
Views: 468

Re: Endorphin.es Running order ; two track trigger sequencer

I can now confirm: Running Order is great! And it pairs so well with Clep Diaz for clocked modulation (clock the modulation with one channel, modulate the other). Few notes: It seems to save state on power down. Nice. It caught me off-guard that the Repeats knobs become CV attenuators (thought it is...
by desolationjones
Fri Oct 09, 2020 3:06 pm
Forum: Macro Machines
Topic: Storage Strip availability
Replies: 10
Views: 2985

Re: Storage Strip availability

Shakmat's upcoming Harlequin's Context will work as a Storage Strip replacement.
by desolationjones
Fri Oct 09, 2020 3:01 pm
Forum: Expert Sleepers
Topic: Disting EX: hysteresis needed I2C connection to F8R
Replies: 13
Views: 179

Re: Disting EX: hysteresis needed I2C connection to F8R

Simoon wrote:
Wed Oct 07, 2020 3:44 pm
Ah didn't spot that - thanks - I'll take a look.
There is a change threshold in F8R's code (config.h, "#define THRESHOLD 4") which you could increase to lower the jitter. The trade-off would be less responsiveness from the faders.
by desolationjones
Wed Oct 07, 2020 2:30 pm
Forum: Eurorack Modules
Topic: Endorphin.es Running order ; two track trigger sequencer
Replies: 12
Views: 468

Re: Endorphin.es Running order ; two track trigger sequencer

Very much looking forward to this one arriving! It will be a great tool for polyrhythms in tuple mode; maybe an instant classic with the simple input mode (very Tempi-like). Seems like the only thing missing is rotation of the euclidean patterns, so a gate delay is probably a good companion. FYI it ...
by desolationjones
Wed Oct 07, 2020 10:18 am
Forum: Eurorack Modules
Topic: clockable envelope Modules
Replies: 19
Views: 382

Re: clockable envelope Modules

Intellijel Shapeshifter on channel 2: "Pressing the QUANT button twice when oscillator 2 is in LFO mode puts the system into a mode where the PITCH2 input becomes a clock input, and the frequency of oscillator 2 follows the frequency of the clock input." Wavetables "LFO3" and "LFO4" have unipolar en...
by desolationjones
Tue Oct 06, 2020 9:45 am
Forum: Eurorack Modules
Topic: Hackme Vectr - 3D Sensing Controller and Sequencer
Replies: 385
Views: 32299

Re: Hackme Vectr - 3D Sensing Controller and Sequencer

Vectr stopped working..... Mine stopped working, wavvy hands thing, no longer works. Tried a reset as per manual, no change. On boot, Blue LED rings cycles, then halts bottom left. Button, flashes when pressed, sometimes quicker. Goes out when encoder it pressed. When encoder is rotated, sometimes ...
by desolationjones
Tue Sep 29, 2020 11:40 am
Forum: Eurorack Modules
Topic: CV and Sync bus - Whats the situation in 2020?
Replies: 31
Views: 688

Re: CV and Sync bus - Whats the situation in 2020?

Select Bus is a protocol which "simply" uses the CV and gate conductors for MIDI messaging. That makes the bus unusable for CV/gate. I say "simply" because the typical Select Bus implementation is not current-driven and optoisolated like DIN MIDI, but the messages are identical. A simple electrical ...
by desolationjones
Fri Sep 25, 2020 6:11 pm
Forum: Eurorack Modules
Topic: Programmable gate sequencers with CV over pattern selection
Replies: 6
Views: 251

Re: Programmable gate sequencers with CV over pattern selection

Teletype!

Your goals sound pretty much identical to mine. It is really easy to make complex algo-rhythms on TT based on some seed value and then all you need to capture is that seed. Or you can literally save your scene with a keyboard combo.
by desolationjones
Wed Sep 23, 2020 7:51 am
Forum: Eurorack Modules
Topic: Cleaning/Replacing pots (Mangrove)
Replies: 3
Views: 131

Re: Cleaning/Replacing pots (Mangrove)

If you intend to desolder it, cut the legs first. Removing one at a time is so much easier than getting the whole works hot without lifting a pad.
by desolationjones
Wed Sep 16, 2020 12:02 pm
Forum: Eurorack Modules
Topic: ADDAC215 Dual S&H+
Replies: 46
Views: 2972

Re: ADDAC215 Dual S&H+

For anyone else looking I was able to get one here (really fast shipping, too): https://www.signalsounds.com/addac-dual-s-h-eurorack-sample-hold-module-addac215 Does anyone else find the minimum slew time to be really long on this? Mine is slewing for several seconds on the minimum setting and is p...
by desolationjones
Sun Sep 13, 2020 6:28 pm
Forum: Eurorack Modules
Topic: Hackme Vectr - 3D Sensing Controller and Sequencer
Replies: 385
Views: 32299

Re: Hackme Vectr - 3D Sensing Controller and Sequencer

Vectr stopped working..... Mine stopped working, wavvy hands thing, no longer works. Tried a reset as per manual, no change. On boot, Blue LED rings cycles, then halts bottom left. Button, flashes when pressed, sometimes quicker. Goes out when encoder it pressed. When encoder is rotated, sometimes ...
by desolationjones
Wed Sep 02, 2020 9:16 pm
Forum: Eurorack Modules
Topic: The state of 1U standards in 2020
Replies: 41
Views: 1023

Re: The state of 1U standards in 2020

Guess I didn't get the memo about PL being the preferred DIY format! :lol: https://scontent.find1-1.fna.fbcdn.net/v/t1.0-9/67627033_947405968973_1477283486409687040_o.jpg?_nc_cat=110&_nc_sid=825194&_nc_ohc=g1KRF3GjKV0AX-snyvz&_nc_ht=scontent.find1-1.fna&oh=fa72ee580f5e4a91375dce5940103500&oe=5F7288...
by desolationjones
Wed Sep 02, 2020 11:14 am
Forum: Eurorack Modules
Topic: Introducing the NEW ETIT matrix mixer
Replies: 11
Views: 495

Re: Introducing the NEW ETIT matrix mixer

I really like the gradient for indicating input rows!
Negative outputs look very handy for feedback loop usage, and much easier to zero out compared to an attenuverting concept.
by desolationjones
Tue Sep 01, 2020 3:37 pm
Forum: Eurorack Modules
Topic: The state of 1U standards in 2020
Replies: 41
Views: 1023

Re: The state of 1U standards in 2020

Guess I didn't get the memo about PL being the preferred DIY format! :lol: https://scontent.find1-1.fna.fbcdn.net/v/t1.0-9/67627033_947405968973_1477283486409687040_o.jpg?_nc_cat=110&_nc_sid=825194&_nc_ohc=g1KRF3GjKV0AX-snyvz&_nc_ht=scontent.find1-1.fna&oh=fa72ee580f5e4a91375dce5940103500&oe=5F7288E...

Go to advanced search