My dealer still hasn't delivered my keyboard version, nor does he answer my emails :bang: Now that I see there is a desktop version, I dropped him an email to cancel the "pre"order. Maybe I go for the desktop version or an entirely different polysynth. The mono output still bugs me . :confused: Wha...

My dealer still hasn't delivered my keyboard version, nor does he answer my emails :bang: Now that I see there is a desktop version, I dropped him an email to cancel the "pre"order. Maybe I go for the desktop version or an entirely different polysynth. The mono output still bugs me. :confused: Whate...

tokidoki wrote: ↑

Sat Jan 16, 2021 4:40 pm

3x Batumi
3x Doepfer A-147-2 VCDLFO
3x 2hp LFO v2
2x Zone B.F. Eowave Dual LFO
2x Blue Lantern Simple VCLFO
2x Modcan Quad LFO
2x Doepfer A-143-9 QLFO
2x WMD/SSF Modbox

Never enough LFOs.

I guess you pre-ordered the new ACL quad LFO

ima_jrk wrote: ↑

Fri Jan 15, 2021 9:25 pm

Is it not possible to load a blank session? I follow the instructions in the video and am unable to load a blank session like is shown in the video, the session I was on just keeps playing.

Have you saved an empty session? That's how I do it. And the Metron needs to be running.

Amplitude modulation

I chime in. Use VCAs only for volume control, and you'll miss most of the fun of modular

No need to list what you can do with them. I think all has been said.

2x Rossum Evolution 2x LPZW Schleussig 2x Doepfer WASP Filter 2x Doepfer Quad Decay 2x Doepfer Octal VCA 2x NE Viol Ruina 2x Tiptop Z4000 2x Tiptop Forbidden Planet 2x Tiptop One 2x 2hp Delay 2x Intellijel Duatt 1U 2x Robaux 3PT 2x NE Lapsus OS 2x MI Veils 2x WMD Voltera 2x Threetom Modular MS22 4x ...

studio460 wrote: ↑

Thu Jan 14, 2021 8:53 pm

Then when I got home, I saw THIS:

That always happens as soon as ordered something

On the other hand, that'd be too much for "just" panning duties, wouldn't it?

Yep, agreed it is confusing in the manual. Glad you seemed to have got it sorted. Had the same issues when I built my VCMC. Wasn't able to setup the -5V to +5V range. Although you can set CV Thing to that bipolar range, instead of 0-10V - Set Voltera to C-3 (-3V, I believe that correlates to 2V in ...

You need to run through the calibration procedure in the global settings. It is in the manual: https://befaco.org/docs/CV_Thing/CV_Thing_V1_User_Manual.pdf Also once calibrate you may have to adjust the CV Delay settings (at least I did on mine) to get the midi notes to trigger at the correct time....

You need to run through the calibration procedure in the global settings. It is in the manual: https://befaco.org/docs/CV_Thing/CV_Thing_V1_User_Manual.pdf Also once calibrate you may have to adjust the CV Delay settings (at least I did on mine) to get the midi notes to trigger at the correct time....

If you don't fall in love with the basic sound character of the Drumbrute, I don't think you're going to ever love it, no matter what effects you slap on it. Maybe you just have to admit to yourself, that you need ditch it and get another one.

Hi I tried to set up the Befaco CV Thing to play the Minimoog synth via MIDI by my Metron/Voltera. But no matter what I do, the notes played by the synth is always off the charts. For example when I play C5 (Voltera at 5V), I get a E3 (!??) while the Minimoog's oscillator is set to 8' I went thru th...

Also consider this: You you won't be able to set any frequency with Pam, it will be always clocked (a division or a multiplication of the clock). These are good points. In fact considering these I would just go with Batumi. Very easy to have multiple synced or free sine LFOs in or out of phase. Bat...

Pam’s is unipolar and the Pan CV inputs on the PM are bipolar, not unworkable but something to consider. THIS ^ Also consider this: You you won't be able to set any frequency with Pam, it will be always clocked (a division or a multiplication of the clock). For example there are just a very slow LF...

Only downside to the steppy is that you only get quarter notes out of it....you have to either run your clock through a 4x multiplier(or run the BPM 4x's higher....which isn't ideal or always possible depending on your clock's max bpm) My Steppy runs at 16th notes. That's the standard I had when cl...

Hyberus wrote: ↑

Sat Jan 09, 2021 10:47 am

Put it down to operator error/stupidity. Tried it again and it was fine. Can confirm that a clock to an individual channel overrides the 'master' clock as one would expect. Happy days

reminds me when plug into TRIG and modulation does nothing and I try desperatly new settings

I use the 1/8” phones output for monitoring. But isn't that subpar, because HP outputs are designed for low impedance headphones? :hmm: I’m using powered monitors, is that even an issue? Sounds fine to me, I’ve got the main outs going to a 4ms Wav, and it’s just easier for me to listen to it this w...

Yeah, the DB25 expander certainly seems a good candidate for a back-of-the-rack install. I was reading back into the thread and its seems the price of admission for a DB25 interface is rather high, starting at about $1,500 (i.e., the PreSonus Quantum 4848). Surely there's a ≈$500 DB25 interface out...

Zymos wrote: ↑

Fri Jan 08, 2021 4:00 pm

I use the 1/8” phones output for monitoring.

But isn't that subpar, because HP outputs are designed for low impedance headphones?

Mines plugged into an intellijel 1U outs mounted right above it. I’m thinking of getting the DB25 output module for it. Problem is how much those DB25 cables stick up. I might whack a hole in the back of my case and mount it there instead! I can't measure it right now, but I'd guess they stick out ...

Very light greyish off white matte, I'm sold maybe with a touch of rainbow glitter

Not to mention doubling 48 1/4" I/Os on the back with insert cables has the potential to create an unholy mess of spaghetti which might intimidate even the most foolhardy of modular synthesists. :lol: Would not want to have to troubleshoot or de-rack that bay. :hihi: You don't wanna go back there a...

No, you could go TRS out of patchbay to dual TS (eg into two mono mixer channels). But this is using the TRS as a stereo connector, not as a balanced connector. It's interesting, but I have enough bay channels/cables go just go discrete TS for all L/R channels, and don 't know enough about the elec...

Extralife Super sixteen in 20HP: https://store.extralifeinstruments.com/ Maybe not what your looking for but the interface really is quite simple. You have 16 step buttons (but can have more steps if wanted). You click on a button and then edit the steps parameter with the knobs and the encoder. I ...