So, since there's still no official manual from WMD 4 years after release of MSCL, clearly they don't plan on writing one. That's disappointing, but maybe they felt the product description was sufficient to explain everything. One would think they would at least update the description when errors a...

Hi, It's the same design, but I re-did the board layout for manufacturability. No functional or user facing changes exist, aside that it looks different.

He probably plugged in power backwards (it's protected, but won't power on....). This is almost always user error. Have him contact WMD if he can't figure it out. But yeah it's almost always user error. Also -- There's a bootloader switch for USB firmware updating, if it's been flipped, then the mod...

FYI -- WMD is constantly producing Performance Mixers. Demand is higher than the rate that we can build them, so we're backordered. Any orders you place will be fulfilled as soon as we can. They are BLACK ONLY, we do not have the capability to manufacture silver panels (they were 3rd party). We fulf...

How would you choose what band you are controlling the frequency of? Whichever one is currently active for editing. I presume CV is disabled in Edit Mode because you typically wouldn't want the frequency modulated while you are dialing in your EQ. However, I'd love to have the option to modulate th...

If someone from WMD checks this thread, can you explain the difference between the MMF and the C4rbn in relation to the ping input? I have both, but I find the MMF ping works better and also sounds better. Is there a way I can create the same ping decay on the C4rbn? I'd like to keep it since it ha...

freqout wrote: ↑

Tue Nov 17, 2020 3:48 pm

i was also trying out the accent stacking functionality, but looking at the envelope through my scope, it seemed like i was just getting full blast accents all the time...

Holding MODE and pressing LEVEL will toggle “accent stacking.”

Yeah my Blender and SSM also have the same issues on all knobs. It doesn't affect anything really in use, but I wish they felt more solid as I, like most people here I'd assume, am a tool fetishist. Also being a craftsperson in a high end market myself I tend to obsess over things like this. It's a...

noisewreck wrote: ↑

Sat Sep 26, 2020 1:20 pm

Seems like it’s out of stock everywhere I’ve checked.

Axxent is available but with my luck, bump by the time Merton becomes available, Axxent will be out of stock

We have a batch currently in production. Should be a few weeks to start shipping them. Thanks

How similar is this to the mmf? I have a pair and use them for stereo filtering and am considering upgrading one to a carbon. Is the fm Input and attenuation scaling the same? It's similar but the C4RBN has been reengineered entirely, so enough things are different that it won't work truly as a ste...

I just bought a used WMD DVCA, and it's very noisy when set to the INST setting (so when the ZCD is turned off). By noisy I mean not just the attack clicks but also a bit crackly. With ZCD turned on it's quiet and usable for audio, but the INST setting is pretty much only useable for modulating CV....

scragz wrote: ↑

Thu Sep 03, 2020 1:25 pm

WMD MMF. The ping input pings the cutoff so it even works like a discount LPG.

They're kinda hard to come by though.

WMD C4RBN replaces the MMF. Second run of C4RBN ships late September.

Maybe something like this would work? https://www.amazon.com/FA-STAR-Reader-Adapter-Compatible-Required/dp/B07M5K7HQ1/ref=sr_1_1_sspa?adgrpid=57600041713&dchild=1&gclid=CjwKCAjwnK36BRBVEiwAsMT8WN_yZ-Oo1kHX_IwDflVNgO6d3JAF8_8_PtUt6m_f-_NnxG2xtEwjahoCkjcQAvD_BwE&hvadid=274706128466&hvdev=m&hvlocphy=9...

Is there a way to update firmware without using a pc/cardreader? I read a bit about forced update using the global settings but can’t find out if this is indeed possible. (Found -update- that scrolls past on encoder 1 but then what?) Any info would be really handy! Cheers. The only supported way to...

Is there a way to update firmware without using a pc/cardreader? I read a bit about forced update using the global settings but can’t find out if this is indeed possible. (Found -update- that scrolls past on encoder 1 but then what?) Any info would be really handy! Cheers. The only supported way to...

Anyone else get any channel bleed with the WMD PM? If I have the volume slider all the way down on a channel with a strong sound, and I have no others sounds, or I have a quiet moment going on, I can hear those channels pretty discernibly. If I mute those channels with the PM Mutes, then they are c...

Anyone else get any channel bleed with the WMD PM? If I have the volume slider all the way down on a channel with a strong sound, and I have no others sounds, or I have a quiet moment going on, I can hear those channels pretty discernibly. If I mute those channels with the PM Mutes, then they are c...

For some reason I can’t get my metron to load an empty slot I press memory select an empty slot that is blinking then press Load twice and it should change to that slot but mine just stays in the slot I had selected before I can change to any slot that has saved information on it not sure what I’m ...

Popped in to say how much I’m loving it. My beats are better than ever! I’d been using a combo of algorithmic (Euclidean, Branches) and preset (Grids, Zularic) but with Metron plus Volteras and Axxent, I feel like I’m at a whole nother level. Sure, I need to program the beats, but now that seems ea...

Still love the sound of mine, but does anyone else find it strange that all of the settings (latches for suboscillator, octave, etc.) are lost on power cycle? It's one of the few modules I own which acts like this. I know that saving state is not always to be expected when there's no physical switc...

Can you order it with a silver panel or buy a separate silver panel? No. We developed an in house process to make panels, and it requires they have a black top layer. We engrave the panels and mill away the black anodize layer. They are fantastic looking and are incredibly durable. No new WMD produ...

Are these on track to have been shipped to vendors on the 20th last week? Everywhere still seems to be in pre-order. We just started shipping a few units last Friday (24th of July), we had a potential COVID case and had to shut down shipping until tests came back (all negative fortunately). We're o...

I've recently racked up my new Metron and Performance Mixer...couldn't be happier! Only problem is...there's a big hole to the right of the mixer where a black PM Channels should be. Does anybody know when those will be available? We just finished a new batch of Channels expanders, they'll be shipp...

staticmass wrote: ↑

Sat Jul 11, 2020 10:38 pm

Is it DC coupled? I'm looking for multimode filter for envelope shaping duties in addition to filtering and this would be perfect in only 4 hp.

Yes C4RBN is fully DC coupled.

fileandplot wrote: ↑

Sat Jul 11, 2020 9:58 am

Anybody know when to expect PM Mutes to be available for purchase?

It shares buttons with Metron, and we're backordered on both! Metron won this round and we're waiting on more switches.

A short amount should leave the shop in a few weeks, and a larger batch at the end of August.

Thanks! - WM